Overview
The Nfab F1730OR is a Multi-Mount light bar mount for a 30-inch LED light bar, made for the 2017 Ford F250, F350, F450 and F550. N-Fab, based in Houston, Texas, fabricates the bracket from .095 wall tubing in a welded, one-piece build. The mount is designed for a front location and is not compatible with models equipped with the Adaptive Cruise Control box.
The bracket is designed to work with LED light bars from all manufacturers, so the light brand is your choice. It is finished in gloss black. N-Fab says its accessories are zinc coated and then powder coated for a lasting finish, and this mount carries a lifetime warranty on the product with a 5 year warranty on the finish.
Key features
- Mounts a 30-inch light bar on the 2017 Ford F250, F350, F450 and F550
- Bolt-on installation with no drilling required
- Welded, one-piece construction from .095 wall tubing
- Gloss black finish
- Designed to work with LED light bars from all manufacturers
- Not compatible with models that have the Adaptive Cruise Control box
- Made in the USA
Front-mounted light bar considerations
A front-mounted light bar sits in the most exposed part of the truck, so it takes road spray, stones and debris. Check the bolts after the first few drives, and again after off-road use. Keep the wiring routed away from hot engine parts and moving components, and protect it with loom where it passes through openings.
Mounts near the front of the truck can sit close to sensors and other forward equipment. Before installing, look at the area where the mount will sit and confirm that nothing is pinched or blocked, including the Adaptive Cruise Control box if your truck has one. The gloss black finish will show scratches, so keep a touch-up supply for any chips that appear.
- Route wiring through a fused relay
- Keep a spare fuse matched to the light bar load
- Confirm the light bar clears the hood at full travel
Specifications
| Brand | Nfab |
|---|---|
| Part number | F1730OR |
| UPC | 843206110636 |
| Light bar size | 30-inch |
| Mount type | Multi-Mount for one light bar |
| Tubing wall | .095 wall tubing |
| Construction | Welded, one piece |
| Finish | Gloss black |
| Location | Front |
| Exclusion | Models with the Adaptive Cruise Control box |
| Warranty | Lifetime on product; 5 year on finish |
| Made in | USA |
Vehicle fitment
The fitment covers the 2017 Ford F250, F350, F450 and F550. The mount does not work on trucks equipped with the Adaptive Cruise Control box, so check for that box before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mount bolts on with no drilling required. Mount the light bar securely, run its wiring through a fused relay, and check local rules before using lights on public roads.
What’s included
The welded mount is supplied as one assembled part. Check the package contents against your installation before starting.
Not included: The light bar, because lights are sold separately.












