Overview
The Baja Designs A-Pillar Sportsmen Kit (part 447504) is a set of powder coated steel A-pillar light mounts for the 18-Current Wrangler JL, 2 and 4 Door. The JL is the Jeep chassis these mounts are made for, and the kit names that model.
The mounts line up with the JL’s factory mounting locations, with no trimming or modification to the vehicle required. The powder coated steel is designed for harsh conditions, and the mounts work with the company’s S2 or Squadron series lights.
Key features
- Mounts to the JL’s factory A-pillar locations
- No trimming or vehicle modification required.
- Powder coated steel construction
- Compatible with S2 or Squadron series lights
- Black finish with direct fit A-Pillar mounting
Wiring and aiming A-pillar lights
Lights on the A-pillar sit high and wide, which makes them useful for spreading light across a trail. Aim them after the vehicle is loaded the way you normally drive, because passenger weight and suspension height change the angle. Re-check aim after the first few trail runs, since vibration can shift adjustment screws.
Wiring matters as much as mounting. A fused circuit protects the vehicle if a wire chafes, and a switch or relay keeps the load off the factory electrical system. Route cables along existing harness paths and secure them away from the windshield and moving parts, so they do not rub or pinch.
- Check bracket bolts after rough trails
- Keep cable routing clear of the windshield wiper area
- Use a switch that is easy to reach while driving
- Confirm light use rules in your area before driving on public roads
Specifications
| Brand | Baja Designs |
|---|---|
| Part number | 447504 |
| UPC | 819314026879 |
| Color | Black |
| Material | Powder coated steel |
| Mounting type | A-Pillar |
| Fitment type | Direct Fit |
| Named vehicle | 18-Current Wrangler JL, 2 and 4 Door |
| Recommended wiring harness | 613600 |
Vehicle fitment
These A-pillar mounts are made for the Jeep JL chassis, named as the 18-Current Wrangler JL, 2 and 4 Door, and they use the JL’s factory mounting locations.
This kit is made for the JL, not the JK, TJ or Gladiator (JT). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wire the lights with a fused circuit. The upgrade uses wiring harness part 613600, and local rules on auxiliary lights should be checked before using them on public roads.
What’s included
The powder coated steel A-pillar mounting brackets. No other included hardware is named.
Not included: the S2 or Squadron series lights and wiring harness part 613600.












