Overview
The MTS Company 2050B is a 16 gallon high density polyethylene fuel tank for 1973–1974 Chevrolet and GMC pickups in Base trim.
The tank has no welds or seams and carries a guarantee against rusting through over the life of the truck. Its insulating wall reduces condensation. It is made in the U.S.A. and fits as a direct replacement.
Key features
- 16 gallon capacity
- High density polyethylene body
- No welds or seams
- Uses the original mounting hardware
- Made in the U.S.A.
- Fits 1973–1974 Chevrolet and GMC C/K pickups and Luv
Sending unit and filler checks
A tank swap is a good time to look at the sending unit and the wiring that feeds the fuel gauge. Test the gauge reading at a few fuel levels before closing up the truck, since a sender that reads wrong after installation can be harder to reach later.
The filler neck, vent line and tank strap points on an older pickup often carry road grime and surface rust. Wipe these parts down, check for cracks, and fit new clamps where the old ones have stretched. Work on the fuel system only with the tank drained or nearly empty, and keep a fire extinguisher nearby.
- Check the sender ground connection
- Inspect filler neck and vent line
- Replace worn strap hardware
Specifications
| Brand | MTS Company |
|---|---|
| Part number | 2050B |
| UPC | 70000026222 |
| Material | High density polyethylene |
| Capacity | 16 gallons |
| Trim listed | Pickup Base |
| Fitment type | Direct fit |
| Origin | Made in the U.S.A. |
Vehicle fitment
The manufacturer fitment list covers 1973–1974 Chevrolet C10, C20, C30, K10, K20, K30 and Luv pickups, and 1973–1974 GMC C15/C1500, C25/C2500, C35/C3500, K15/K1500, K25/K2500 and K35/K3500 pickups, all in Pickup Base trim.
The list does not include other model years, other pickup trims or any Wrangler. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The tank installs with the original mounting hardware. Work on the fuel system with the tank empty and away from ignition sources.
What’s included
The tank is the only item covered here. Sending unit, fuel lines and extra hardware should be checked against your installation before starting.









