Overview
The Mr. Gasket 9833 is a chrome dress-up kit for under-hood engine dress-up. It includes two valve covers with gaskets, push-on wire looms and dividers, and clamps, wing bolts and grommets.
It fits 1965–1985 Ford Bronco, F-series pickups, E-series vans and the Ranchero. It is intended for race use only.
Key features
- Chrome finish
- Two valve covers with gaskets
- Push-on wire looms and dividers
- Clamps, wing bolts and grommets included
- Intended for race use only
Dress-up parts for race engines
Valve covers are a visible part of an engine’s top end, but they also seal oil inside the head, so their gaskets and wing bolts deserve the same care as any other seal. Chrome finish stays clean with regular wiping, though it can show heat stains near exhaust manifolds. Keep dress-up parts clear of hot surfaces and check that the covers sit flat before tightening.
Wire looms and dividers help route spark plug wires neatly and keep them separated, which makes checking the ignition system easier. Plan the wire routing before final tightening of the covers so the looms clear the cover edges and any intake components. Race use often means frequent teardown, so check gasket condition whenever the covers come off.
- Wipe chrome with a soft cloth to keep it clean
- Check gaskets for seepage at each oil change
- Confirm the covers clear the intake and wires before starting
Specifications
| Brand | Mr. Gasket Company |
|---|---|
| Part number | MRG9833 |
| Finish | Chrome |
| Contents | Two valve covers and gaskets, push-on wire looms and dividers, clamps, wing bolts, grommets |
| Use | Race only |
| Fitment type | Direct fit |
Vehicle fitment
It fits Ford Bronco models from 1966 to 1977 and 1980 to 1985, the 1975–1977 Bronco Sport, E-100 through E-350 vans, F-100, F-150, F-250 and F-350 pickups, the 1965 Falcon sedan delivery, and the 1965–1979 Ranchero.
The F-250 and F-350 entries skip 1975–1976 and 1979, and model years after 1985 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installing new valve covers means removing the stock covers, so disconnect the battery and let the engine cool before starting.
What’s included
The kit includes two valve covers and gaskets, push-on wire looms and dividers, clamps, wing bolts and grommets.
Not included: Check spark plug wires and other engine parts against your installation before starting.









