Overview
The Mr. Gasket Company Aluminum Carburetor Spacer Kit, part number MRG4945, is an aluminum carburetor spacer that raises the carburetor above the intake manifold. It adds plenum volume and increases the carb-to-plenum floor distance.
Mr. Gasket gives the fitment as universal, and no engine, vehicle year or model is named, so confirm that the spacer flange and bolt pattern match your carburetor and intake before buying.
Key features
- Aluminum construction
- Adds plenum volume
- Increases carb-to-plenum floor distance
Spacer height and airflow
A carburetor spacer raises the carburetor above the intake, which changes how air and fuel reach the engine. Extra plenum volume and a greater carb-to-plenum floor distance can alter how the mixture settles at the intake. Spacers are usually chosen to suit a specific engine and carburetor combination, so the height and flange should be matched carefully before installation.
Check the mounting surfaces for flatness and cleanliness before fitting. Use new gaskets and torque the fasteners evenly in a crisscross pattern. Look for leaks, uneven idle, or hesitation after installation, since these can point to a seal or alignment problem. Recheck the bolts after the first drive, as they can loosen with heat cycles.
- Clean the carburetor and intake faces
- Use new gaskets at each interface
- Recheck fasteners after the first drive
Specifications
| Brand | Mr. Gasket Company |
|---|---|
| Part number | MRG4945 |
| Material | Aluminum |
| Type | Carburetor spacer kit |
| Fitment | Universal fit |
Vehicle fitment
Fitment is given as universal, so this spacer is not tied to a specific vehicle year, model or engine.
Confirm your vehicle’s year, model and trim before ordering.









