Overview
The Mr. Gasket Company Chrome Plated Steel Water Pump Pulley, part number MRG4967, is a chrome plated steel pulley for an engine’s water pump. Fit depends on the water pump shaft, belt path and engine, so confirm those before ordering.
Key features
- Chrome plated steel construction
- Designed as a water pump pulley
- Designed to work with a water pump shaft and drive belt
Belt alignment and pulley fit
A water pump pulley turns with the belt, so its groove alignment and its position on the pump shaft decide how the belt tracks. Check that the pulley sits square and flush with the pump shaft before tightening. A pulley that sits off-center can throw the belt off the grooves and wear the belt edges quickly.
Pulleys wear at the grooves and at the bearing. Look for wobble when turned by hand, chipped or worn grooves, and rust on the hub. A worn pulley should be replaced together with the drive belt, since a new belt on a worn pulley wears out fast. Recheck belt tension after the first run.
- Check the pulley seats flush on the pump shaft
- Inspect grooves for chips or wear
- Check for wobble when turned by hand
- Replace the belt when the pulley is replaced
Specifications
| Brand | Mr. Gasket Company |
|---|---|
| Part number | MRG4967 |
| Material | Chrome plated steel |
| Part type | Water pump pulley |
Vehicle fitment
Pulley fit depends on the water pump shaft, belt path and engine. Confirm the pulley matches your water pump, belt layout and engine before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check belt alignment and pulley clearance against the engine’s accessory drive before running the engine.
What’s included
Check the package contents, including whether a bolt set or belt is included, before starting the installation.
Not included: Have the water pump and drive belt ready before fitting the pulley.









