Overview
The Mr. Gasket Thermostat Gasket, part number MRG746C, is a gasket for Ford V8 engines, designated GSKT-SB. It is a direct fit for Ford Bronco, E-Series van, F-Series pickup and Ranchero models from 1975 to 1995.
Key features
- Thermostat gasket for Ford V8 engines
- Designation GSKT-SB
- Direct fit per the manufacturer
Gasket sealing basics
A thermostat gasket seals the joint between the thermostat housing and the engine, so coolant stays inside the system under pressure and heat. Gaskets compress when the housing is tightened, which means a fresh gasket usually needs to be installed each time the housing is removed. Reusing an old gasket often leads to seepage that is hard to spot until the coolant level drops.
Before fitting the new gasket, clean both mating surfaces thoroughly and check the housing and engine face for warping or pitting. Even a small uneven spot can break the seal. Follow the torque values in your service manual for the housing bolts, and tighten them evenly rather than one at a time.
- Scrape off old gasket material without gouging the metal
- Wipe surfaces with a clean, lint-free cloth
- Check for leaks after the engine warms up and cools down
- Keep a fresh gasket on hand before starting the job
Specifications
| Brand | Mr. Gasket Company |
|---|---|
| Part number | MRG746C |
| Part type | Thermostat gasket |
| Engine | Ford V8 |
| Designation | GSKT-SB |
| Fitment | Direct fit |
Vehicle fitment
It fits 1981–1995 Ford Bronco models, 1975–1995 Econoline E-100, E-150, E-250 and E-350 vans, 1981–1995 F-150 and F-250 pickups, 1981–1992 F-350 pickups, 1993–1995 F-150 Lightning, and 1975–1979 Ranchero models, in the trims named for each.
Other Ford engines and years outside these ranges are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package is one gasket. Check the package contents against your installation before starting.









