Overview
The Moog K201389 is a split rear stabilizer bar bushing kit, sold in pairs, for the 2002–2005 Ford Explorer, 2003–2005 Lincoln Aviator and 2002–2005 Mercury Mountaineer. It sits at the rear to frame location as a black rubber bushing.
The split design is meant to make installation easier, and the inner sleeve is phosphate coated for corrosion protection. Moog says replacing a worn bushing can reduce front end noise and restore like-new steering and handling.
Key features
- Split design for easier installation
- Phosphate coated inner sleeve
- Sold in pairs
- Black rubber construction
- Rear to frame location
- Designed for long life.
Rear bushings and noise
Rear stabilizer bar bushings hold the bar to the frame and let it rotate as the suspension moves. When the rubber cracks or hardens, the bar can knock or move in its mounts, which often shows up as a dull clunk over bumps or a creak when the suspension loads and unloads. Noise from this area can be mistaken for worn front end parts, so it is worth looking at the rear bushings during a noise check.
Split bushings are fitted around the bar rather than slid over its end, so the new pieces need to sit square and seated in the bracket. Apply a suitable lubricant at installation as the instructions allow, and avoid petroleum-based products that can swell rubber. Re-check the bushing position after the first drive, and look for splits along the seam, which can signal a poor fit.
Specifications
| Brand | Moog |
|---|---|
| Part number | K201389 |
| Position | Rear, to frame |
| Design | Split |
| Material | Rubber |
| Color | Black |
| Inner sleeve | Phosphate coated |
| Quantity | Pair |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2002–2005 Ford Explorer (Eddie Bauer, Limited, NBX, Postal, XLS, XLS Sport, XLT and XLT Sport), the 2003–2005 Lincoln Aviator (Base) and the 2002–2005 Mercury Mountaineer (Base, Luxury and Premier).
The list does not include the 2006 and later Explorer or the 2001 and earlier Explorer. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The split design is intended to make the bushing easier to fit around the bar. Check the rear to frame position before the new bushings are installed.
What’s included
Two bushings, because the kit is sold in pairs.









