Overview
The Mishimoto Thermostatic Oil Cooler kit, part number MMOC-WRA-07T, is a direct-fit oil cooler kit for the 2007-2018 Jeep Wrangler JK, in 2-door and 4-door models with the 3.8L 6-cylinder engine. The kit is built to reduce oil temperature by up to 40 degrees and to add .75 qt to oil capacity.
Excessive oil temperatures break down oil faster, which matters on trail and dune driving. The kit uses JK-specific mounting brackets, premade stainless steel lines, an oil filter sandwich plate and the hardware needed for installation. It is designed to keep pressure drop minimal.
Key features
- Thermostatic oil cooler with a silver cooler
- Reduces oil temperature by up to 40 degrees
- Adds .75 qt to oil capacity
- JK-specific mounting brackets
- Premade braided stainless steel oil lines with AN fittings
- Oil filter sandwich plate and all hardware included
Oil cooler upkeep
An oil cooler works only when air flows across its fins, so keep them clear of mud, leaves and road debris. After off-road use, rinse the cooler face gently with low pressure water and check that a grille or bumper accessory is not blocking airflow.
Inspect the braided lines and AN fittings at each oil change. Look for abrasion where lines pass near the frame, chafing at clips and any seepage at the fittings. Tighten fittings only to the snug point suited to AN connections, since overtightening can damage the sealing surface. Check the dipstick after the first drive, because the added capacity changes the oil level.
- Keep cooler fins free of debris
- Check line clearance from exhaust and moving parts
- Look for seepage at AN fittings after each oil change
Specifications
| Brand | Mishimoto |
|---|---|
| Part number | MMOC-WRA-07T |
| UPC | 748354010503 |
| Product type | Thermostatic oil cooler kit |
| Cooler color | Silver |
| Engine | 3.8L 6 cylinder |
| Oil temperature reduction | Up to 40 degrees |
| Oil capacity increase | .75 qt |
| Oil lines | Premade braided stainless steel with AN fittings |
| Doors | 2-door and 4-door models |
| Fitment type | Direct Fit |
| Warranty | The AN lines carry a lifetime warranty. |
Vehicle fitment
This kit is made for the 2007-2018 Jeep Wrangler JK in 2-door and 4-door models only. It does not fit the Wrangler YJ, TJ, LJ or JL.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit uses JK-specific brackets, an oil filter sandwich plate and premade lines, so plan on draining the oil before fitting the plate and lines. Route the braided lines clear of hot exhaust parts and moving components, and work only on a cool engine.
What’s included
Thermostatic oil cooler, JK-specific mounting brackets, premade stainless steel braided oil lines with AN fittings, an oil filter sandwich plate, and all hardware needed for installation.


















