Overview
The Mickey Thompson Classic III 15×10 wheel in Black, part number M/T90000001790, is a 15 inch aluminum truck wheel, 10 inches wide. It has a 5 on 4.5 bolt pattern, a -45 offset and 3.7 backspacing, with polished hand holes and a satin black finish. It suits truck builds that need a wider wheel with a negative offset.
The wheel has a satin black finish with a protective clear coat and is rated for high loads. A limited lifetime warranty applies, and the M/T stamp of quality marks the wheel’s build. Because it is a universal fit wheel, confirm the 5 on 4.5 bolt pattern, 83 center bore and -45 offset against your hub before ordering.
Key features
- Polished hand holes for a distinctive look
- Satin black finish with a protective clear coat
- 15 inch diameter and 10 inch width
- High load rating stated by Mickey Thompson
- Limited lifetime warranty from Mickey Thompson
Setting up a wide truck wheel
A 10 inch wide wheel with a -45 offset pushes the tire outward. That position affects steering geometry, brake clearance and how much fender space the tire uses at full lock. Test fit the wheel on the hub before mounting tires and check each of those clearances.
Satin black finishes with a protective clear coat keep the face cleaner between outings, but trail contact can still scuff it. Rinse mud from the hand holes after trips so the polished areas stay clean and easy to inspect. Routine checks on lug seats and spokes still matter with any wheel.
Load rating only applies when the wheel is mounted correctly, so torque lug nuts to the stud specification and recheck them after the first trip. Inspect the spokes and lip for cracks at each tire rotation.
- Test fit before mounting tires
- Check brake clearance with the wheel on
- Recheck lug torque after early drives
- Inspect hand holes for cracks after trail use
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | M/T90000001790 |
| Style | Classic III |
| Finish | Satin black with protective clear coat |
| Construction | Aluminum |
| Wheel diameter | 15 inches |
| Wheel width | 10 inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 83 |
| Offset | -45 |
| Backspacing | 3.7 |
Vehicle fitment
Universal Fit is the label Mickey Thompson uses here, and no vehicle is named, so the wheel is not matched to one model. Check the 5 on 4.5 bolt pattern, the 83 center bore and the -45 offset against your hub. A center bore of 83 has to match your hub bore, so confirm it by measurement before ordering.
Mickey Thompson does not offer center caps for 1997 and earlier Ford 3/4 and 1-Ton Pickups, for 2002 and earlier Dodge/Ram 3/4 and 1-Ton Pickups, for 1997 and earlier Toyota Land Cruiser Models, or for 1986 and earlier Jeep CJ Models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test fit the wheel on the hub before mounting tires, checking the -45 offset and 3.7 backspacing against brake and suspension clearance. Torque lug nuts to the specification for your studs and recheck after the first few drives.
What’s included
The 15×10 Classic III wheel in Black. Center caps are not included.
Not included: Tires and center caps for applications where they are available.









