Overview
The Mickey Thompson Classic Baja Lock 15×8 is a matte black aluminum wheel, part number M/T90000020047, with a 15 inch diameter and an 8 inch width. It uses a 6 on 5.5 bolt pattern and a 106 center bore, and it is listed with an offset of -22 and backspacing of 3.7.
The Baja Lock takes the Classic III design and adds a simulated bead lock feature, so the face looks like a real beadlock without the added cost. It is built for 4×4 owners who want off-road race or rock crawler styling. Matching the wheel to your own hub before buying is the first step.
Key features
- Simulated bead lock feature on a Classic III based design
- Holes style face in a matte black finish
- Aluminum construction, 15 inches in diameter and 8 inches wide
- Offset -22 and backspacing 3.7
- Lifetime limited guarantee for structural defects, plus a one year finish warranty from the maker
Things to check
Backspacing and offset set how far the wheel sits relative to the hub, so a -22 offset pushes the face outward toward the fender. Before fitting larger tires, check suspension travel and steering lock, since outward offset reduces clearance on turns. Lift kits and wider tires often change the rub point, so re-test clearance after any suspension change.
The hole style face and matte black finish are easy to keep looking sharp. Rinse off mud and road grime after trail runs, and clean brake dust with mild soap and a soft brush. Inspect the lug seats and studs periodically, since loose hardware is a common reason a wheel works loose on rough terrain.
Pair the wheel with lug hardware that matches the seat design, and use a torque wrench to set the nuts before driving. Recheck after the first few trail runs.
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | M/T90000020047 |
| Style | Holes (Classic Baja Lock) |
| Finish | Matte black |
| Construction | Aluminum |
| Wheel diameter | 15 Inches |
| Wheel width | 8 Inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 106 |
| Offset | -22 |
| Backspacing | 3.7 |
| Warranty | Lifetime limited guarantee for structural defects; one year finish warranty |
Vehicle fitment
No specific vehicle is named for this wheel because it is a universal fit design. Compare the 6 on 5.5 pattern, the 106 center bore and the -22 offset with your hub and fender clearance.
Center caps are unavailable on certain applications, including 1997 and earlier Ford 3/4 and 1-Ton pickups, 2002 and earlier Dodge/Ram 3/4 and 1-Ton pickups, and 1986 and earlier Jeep CJ models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An offset of -22 with 3.7 backspacing pushes the wheel outward, so check tire and fender clearance on a test fit before final mounting.
What’s included
No lug nuts, center caps or tires are named as included with this wheel.









