Overview
Method’s 406 Beadlock in 14×8 with a 4 on 156 bolt pattern and matte black mesh is part MRWMR40648046544B, a UTV wheel with a matte black beadlock ring and a 4+4 backspace.
The 406 is the third model in the UTV line, with sizes from 12 to 14 inches. Its design suits sand riding, where an even offset helps floatation. This 14 inch model is 8 inches wide.
The inner barrel tapers so that mud and rock cannot pack in against the brake calipers, and that taper also keeps weight down. The forged 6061 ring is fastened with Grade 8 zinc-plated hardware countersunk into the ring. The wheel carries a 1600 lb load rating and comes with a center cap.
Key features
- Matte black mesh face
- Tapered inner barrel
- Forged 6061 ring with countersunk Grade 8 hardware
- 1600 lb load rating
- Center cap included
- Limited lifetime warranty noted by Method
Choosing a UTV beadlock width
Width shapes how a beadlock wheel sits in the fender and how much tire fits inside the arch. Sand and mud riders often pick a wider wheel to spread the tire footprint, though a wider wheel also needs more clearance from the brakes and suspension. A tapered inner barrel helps keep debris from packing in against the calipers.
Matte black mesh faces show scuffs and mud stains more than gloss finishes, so a routine wash keeps the wheel looking clean. Check the ring hardware after the first rides, since beadlock fasteners can settle as the tire seats. Pick a width that matches the tire you plan to run rather than the one you had before, and check the backspace against your current setup.
- Match wheel width to the tire tread
- Check brake clearance with the tire mounted
- Clean mud from the mesh after each ride
- Re-check ring fasteners after the first runs
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR40648046544B |
| Style | 406 Beadlock |
| Wheel type | UTV |
| Size | 14×8 |
| Bolt pattern | 4 on 156 |
| Backspace | 4+4 |
| Beadlock | Yes |
| Finish | Matte black |
| Beadlock ring | Forged 6061 aluminum |
| Hardware | Grade 8, zinc plated, countersunk |
| Size range | 12 to 14 inches |
| Load rating | 1600 lb |
| Fitment | Universal fit |
Vehicle fitment
Universal fit means the wheel is not built for one UTV model. The 8 inch width and 4+4 backspace decide how the wheel sits inside the fender, so measure against your current wheels first.
Because the 14×8 size and 4+4 backspace both affect clearance, measure the space between the wheel and your brake calipers before you order a set.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A center cap and the forged 6061 ring with its Grade 8 hardware come with the wheel.
Not included: Tires.










