Overview
The Method Race Wheels 409 UTV Bead Grip is a 15×10 matte black UTV wheel with a 5+5 backspace and a 4 on 136 bolt pattern. It is the 15×10 size in Method’s 409 line and uses the same Bead Grip design as the smaller 409 wheels.
The bead seats have a safety hump that helps prevent de-beading. The wheel was engineered to reduce weight and increase strength, and it went through finite element analysis and field testing. Its body is one-piece 356 aluminum with T6 heat treatment.
This wheel is 15×10, a 15 diameter rim with a 10 width, which gives the tire a much larger footprint than the 7-width 15×7 wheels. The 5+5 backspace sets the distance from the mounting face to the inner edge, and the 4 on 136 bolt pattern means four lug holes on a 136 bolt circle. A wider wheel changes how far the tire sits in the fender and how close it comes to the suspension, so measure clearance before mounting. The body is one-piece 356 aluminum with T6 heat treatment, and no weight or load rating is given.
Key features
- Bead Grip design for tire bead grip
- Safety hump on the bead seats
- One-piece 356 aluminum
- T6 heat treatment
- Matte black finish
- Non-beadlock design
Wider rims and clearance
A wide rim changes how a tire sits in the fender and near the suspension. The tire’s sidewall and the backspace together decide how close the tread comes to control arms, shocks and body panels, so clearance is best judged with the tire you plan to run, at full suspension travel and full steering lock.
Wide-rim setups put more load on hubs and wheel bearings over rough ground. Check the lug nuts after the first few runs, and look at the bead seats for scuffs if the tire has been slipping on the rim.
- Measure rub clearance at full steering lock
- Confirm the tire’s rim width rating before mounting
- Recheck lug torque after the first trail runs
- Inspect bead seats after any slipped bead
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR40951047555 |
| Style | 409 Bead Grip |
| Wheel type | UTV |
| Wheel size | 15×10 |
| Backspace | 5+5 |
| Bolt pattern | 4 on 136 |
| Finish | Matte Black |
| Beadlock | No |
| Construction | One-piece 356 aluminum |
| Heat treatment | T6 |
Vehicle fitment
Fit is not tied to a specific vehicle. Confirm fit for your UTV’s year, model and trim before ordering, and check the 15×10 width and 4 on 136 bolt pattern before mounting.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Only the wheel is described. No hub cover or hardware is mentioned.
Not included: tires.










