Overview
The Method Race Wheels 405 UTV Beadlock in 15×7 with a 4 on 136 bolt pattern and matte black finish, part number MRWMR40557047552B, is an aluminum beadlock wheel for UTVs from Method’s 405 series.
The wheel has an offset of 38, a backspacing of 5.5 and a center bore of 106. Measure your hub before ordering, since the center bore has to suit the hub the wheel mounts to.
The 405 is built for serious racing and enthusiast use. The forged 6061 ring is paired with a wheel offered from 14 to 15 inches in this finish, and it has a 1600 lbs load rating.
Because the offset and backspacing are both given, you can compare this wheel with your current set and see how far it will move in or out. The final fit still depends on your own hub and the clearances on your machine.
Key features
- Forged 6061 beadlock ring
- Matte black wheel and ring
- Offset of 38 and backspacing of 5.5
- Center bore of 106
- Grade 8 zinc-plated hardware
- 1600 lbs load rating
Offset and backspacing explained
Offset and backspacing describe where the mounting face sits relative to the centerline of the wheel. A lower offset pushes the wheel outward and widens the track, while a higher offset tucks it inward toward the suspension. Those two measurements together set how the tire sits in the fender and how much room remains at the brakes and steering parts.
Center bore matters separately. A bore that matches the hub lets the wheel center itself, which reduces vibration at speed. When a bore is larger than the hub, a hub-centric ring is commonly used to fill the gap. Keep hardware clean and check that the wheel seats flat against the hub before tightening.
- Measure current offset before buying replacements
- Expect track width to change with a different offset
- Check for tire rub after the first short drive
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR40557047552B |
| Series | MR405 UTV Beadlock |
| Style | Beadlock |
| Wheel type | UTV |
| Diameter | 15 inches |
| Width | 7 inches |
| Bolt pattern | 4 on 136 |
| Offset | 38 |
| Backspacing | 5.5 |
| Center bore | 106 |
| Finish | Black |
| Construction | Aluminum |
| Beadlock ring | Forged 6061 |
| Hardware | Grade 8, zinc plated |
| Load rating | 1600 lbs |
| Fitment | Universal fit |
Vehicle fitment
Universal fit is the stated fitment, so this wheel is not built for a single UTV. The 38 offset, 5.5 backspacing and 106 center bore decide clearance to brakes and suspension, so check them against your current wheels before ordering.
If you are moving from a wheel with a different offset, expect the track width to change and check tire clearance before you drive the vehicle.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The forged 6061 beadlock ring and Grade 8 zinc-plated hardware are part of the wheel package.
Not included: Tires.











