Overview
The Method 409 UTV Bead Grip in gray is a 14×7 UTV wheel with a 4 on 156 bolt pattern and a 4+3 backspace. Method’s Bead Grip technology is built to hold the tire bead when the tire is run at low pressure.
The 409 uses one-piece 356 aluminum with T6 heat treatment, and the design keeps weight low while maintaining strength. The wheel has a safety hump on the bead seats to help prevent de-beading.
Gray is the finish on this 14×7 wheel, and the size is a 14 diameter with a 7 width. The 4+3 backspace and 4 on 156 bolt pattern are the figures to match against your UTV’s hub and the wheels you are replacing. The tire mounted on it must be built for a 14 diameter rim, and Method gives no tire pairing for this part. The body is one-piece 356 aluminum with T6 heat treatment, and the wheel is non-beadlock, so it uses the Bead Grip design to hold the tire bead instead of a locking ring. No weight or load rating is listed.
Key features
- Bead Grip design for grip at low pressure
- Safety hump on the bead seats
- One-piece 356 aluminum body
- T6 heat treatment
- Gray finish
- Non-beadlock design
Bead Grip and low pressure
Bead Grip wheels are built to hold the tire bead without a locking ring, so they suit riders who run lower pressures for traction. The safety hump on the bead seat gives the tire an extra shoulder to sit against, which helps reduce the chance of the bead pulling off during hard turns. The seat still needs to be clean and undamaged for the bead to seat well.
Bead seat condition is a regular check. Scratches, corrosion or dried mud on the seats can stop a tire from holding pressure, so clean them before mounting. Lower pressure also means tires flex more, so watch for rim contact on rocks. Gray finishes hide light scuffs well, but deeper gouges should be looked at because they can change how the bead seats.
- Clean bead seats before every mount
- Inspect the safety hump for damage
- Watch for rim damage after rock runs
- Match the tire to the 14 inch rim
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR40947046443 |
| Style | 409 Bead Grip |
| Wheel type | UTV |
| Wheel size | 14×7 |
| Backspace | 4+3 |
| Bolt pattern | 4 on 156 |
| Finish | Gray |
| Beadlock | No |
| Construction | One-piece 356 aluminum |
| Heat treatment | T6 |
Vehicle fitment
No vehicle fitment is given for this gray 409. The 14×7 size and 4 on 156 bolt pattern have to suit your UTV, so compare them with your current wheels before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
No accessories or hardware are named for this wheel.
Not included: tires.










