Overview
The Method Race Wheels 401 UTV Titanium Beadlock in 14×7 (part number MR40147046843B) is an aluminum beadlock wheel with a titanium finish and a 4 on 156 bolt pattern. It is 14 inches in diameter and 7 inches wide, with an offset of 4+3, a backspacing of 4.5 and a center bore of 132.
The wheel includes a forged 6061 beadlock ring and carries a 1600 lb load rating. The ring is fastened with Grade 8 zinc plated hardware, which comes with the wheel.
The 401 UTV Titanium Beadlock is made for enthusiasts who want a wheel built for race and street use. It belongs to the MR401 UTV Beadlock series.
Key features
- Titanium finish on an aluminum beadlock wheel
- Forged 6061 beadlock ring
- Grade 8 zinc plated mounting hardware
- 4 on 156 bolt pattern
- Offset of 4+3 with a 4.5 backspacing and 132 center bore
- 1600 lb load rating
Matching a UTV hub
A UTV hub sets the bolt pattern and center bore a wheel must match, and the offset decides how far the wheel sits from the hub face. A snug center bore keeps the wheel centered, so the lug studs carry less of the load. Measure the hub before buying, because a small mismatch in bore or pattern can make mounting impossible or cause vibration.
Titanium finishes resist wear, but they still need routine care. Dirt and grit left on a wheel can scratch the surface, so rinse after each ride. Beadlock wheels also rely on the ring and hardware staying tight, so inspect those parts alongside the wheel face. Tire balance should be checked after mounting, since the ring and fasteners add weight on one side.
- Measure the bolt pattern and center bore
- Compare offset with your current wheel
- Rinse mud and grit off after each ride
- Re-check ring hardware after the first runs
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MR40147046843B |
| Series | MR401 UTV Beadlock |
| Diameter | 14 inches |
| Width | 7 inches |
| Offset | 4+3 |
| Backspacing | 4.5 |
| Center bore | 132 |
| Bolt pattern | 4 on 156 |
| Finish | Titanium |
| Style | Beadlock |
| Construction | Aluminum |
| Beadlock ring | Forged 6061 |
| Mounting hardware | Grade 8 zinc plated |
| Load rating | 1600 lbs |
| Wheel type | UTV |
| Fit type | Universal fit |
Vehicle fitment
Confirm the 4 on 156 bolt pattern and center bore match your UTV before ordering.
Installation notes
Tighten the beadlock ring hardware evenly as the wheel is assembled, then check that the ring is seated before the wheel is used.









