Overview
The 406 Beadlock in 14×10 with a 4 on 156 bolt pattern has a matte black mesh design, part number MRWMR40641046555B. It is a UTV wheel with a matching matte black beadlock ring.
The 12 to 14 inch range suits staggered sand setups, and an even offset supports floatation. This 14 inch wheel is 10 inches wide with a 5+5 backspace.
The inner barrel is tapered so mud and rocks do not build up and damage the brake calipers, which also reduces weight. The ring is forged 6061 aluminum, and Grade 8 zinc-plated hardware is countersunk into it. A limited lifetime warranty applies to the wheel.
This 14 inch wheel is 10 inches wide with a 5+5 backspace. Method’s sand guidance for the 12 to 14 inch range applies to a wheel of this size, so it is worth comparing the offset with your current set.
Key features
- Matte black mesh wheel
- Forged 6061 aluminum beadlock ring
- Grade 8 zinc-plated hardware countersunk into the ring
- Tapered inner barrel
- 1600 lb load rating
- Center cap included
Staggered setups and tire choice
A staggered setup uses a wider wheel on the rear than the front, often to fit a larger rear tire for traction. Matching the wheel width to the tire section keeps the sidewall in the right shape and reduces wear. Sand riding brings its own considerations, since an even offset across the axle helps the tire float rather than dig in.
Beadlock wheels work well with low pressure, but the bead still needs careful setup. Inflate slowly after mounting, confirm the ring is evenly seated, and keep spare bolts and a small pump in the rig. Inspect the tire bead and wheel edge after rough runs, especially if the tire was run very low.
- Match wheel width to the tire section
- Keep an even offset front to rear for sand
- Carry a pump and spare hardware
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR40641046555B |
| Style | 406 Beadlock |
| Wheel type | UTV |
| Size | 14×10 |
| Bolt pattern | 4 on 156 |
| Backspace | 5+5 |
| Beadlock | Yes |
| Finish | Matte black |
| Beadlock ring | Forged 6061 aluminum |
| Hardware | Grade 8, zinc plated, countersunk |
| Size range | 12 to 14 inches |
| Load rating | 1600 lb |
| Fitment | Universal fit |
Vehicle fitment
The wheel is a universal fit, so it is not tied to one UTV. A 10 inch width with a 5+5 backspace changes how the wheel sits against brakes and suspension, so measure clearance before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The forged 6061 ring, the countersunk Grade 8 hardware and a center cap are included.
Not included: Tires.










