Overview
The Method Race Wheels MR606 Mesh in 20×10, Titanium finish, part number MRWMR60621087824N, uses an 8 on 170 bolt pattern. It is the second wheel in Method’s 600 Series and pushes the clean styling of the MR306 Mesh further, aimed at owners who want a deep-dish profile on lifted vehicles.
This version has a 3 inch lip on the 20×10 size and a non-beadlock lip design with removable stainless steel bolts. A snap-in cap with a raised Method logo covers 5 and 6 lug applications, and a separate bolt-on piece covers 8 lug. Method rates the wheel at 2650 lbs for 5 and 6 lug and 3640 lbs for 8 lug, and the 8 lug figure applies to this 8 on 170 version.
Key features
- Titanium finish on aluminum construction
- Mesh style with an uncluttered face
- Non-beadlock lip with removable stainless steel bolts
- Bolt-on center ring with a snap-in cap for 5 and 6 lug applications
- Separate bolt-on piece for 8 lug applications
- Second Method logo debossed into one spoke
- Load ratings of 2650 lbs (5 and 6 lug) and 3640 lbs (8 lug)
Clearance on a deep-dish setup
Negative offset moves the wheel outward, so the tire and wheel sit farther from the hub face than a standard wheel. That can change the gap to fender liners, control arms and the front brake caliper. Measure clearance with the tire you plan to run, both straight ahead and at full lock, before the vehicle is driven.
Suspension travel also matters. A lifted vehicle compresses and extends differently than stock, so rub points can appear only at full articulation. Rotate the tire by hand while someone cycles the suspension, and recheck after any change in tire size or ride height. Keep spacers out of the setup unless they are part of a deliberate plan, since they add to the outward position.
- Check fender liner contact at full lock
- Measure caliper clearance with the planned tire
- Recheck after changing tire size or lift height
- Avoid stacking spacers without checking clearance
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR60621087824N |
| Style | MR606 Mesh |
| Wheel diameter | 20 Inches |
| Wheel width | 10 Inches |
| Offset | -24 |
| Backspacing | 4.55 |
| Bolt pattern | 8 on 170 |
| Lip | 3 inch lip on the 20×10 size |
| Load rating | 2650 lbs (5 and 6 lug); 3640 lbs (8 lug) |
| Finish | Titanium |
| Construction | Aluminum |
| Fitment | Universal Fit |
Vehicle fitment
Universal Fit is the only fitment that applies, so no year, make or model is named. Match the 8 on 170 bolt pattern, -24 offset and 4.55 backspacing to your hub, and confirm the hub bore fit before ordering.
The 20×10 Mesh is not the same size as the 20×12 version, which has a 5 inch lip. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A -24 offset with 4.55 backspacing sits the wheel differently from the 20×12 versions, so measure fender and brake clearance before fitting.
What’s included
The design includes a bolt-on center ring, a snap-in cap for 5 and 6 lug use, a bolt-on piece for 8 lug and the stainless steel lip bolts.
Not included: tires.










