Overview
A windowed Method Race Wheels 701 Trail Series wheel in Matte Black, part number MRWMR70178587500, measures 17 Inches by 8.5 Inches and runs an 8 on 170 bolt pattern. The one-piece cast aluminum body has a 131 center bore, an offset of 0 and a backspacing of 4.75. Method labels it universal fit, so the hub match, not a vehicle name, decides whether it works for you.
Bead Grip is a patent pending feature that engages the tire bead seat to add grip when the tire runs at lower air pressures. The wheel has a reinforced inner lip from race wheel design and a safety hump on the inner and outer bead seat, which helps stabilize the tire and prevent de-beading. The wheel was developed with finite element analysis and field testing to reduce weight while increasing strength.
Key features
- Matte Black finish with a windowed design.
- 8 on 170 bolt pattern with a 131 center bore.
- One-piece cast 356 aluminum, T6 heat treated.
- Bead Grip (patent pending) for added tire grip at lower pressures.
- Reinforced inner lip from race wheel design.
- Safety humps that help stabilize the tire against de-beading.
Trail wheel basics
Trail wheels carry the tire over rocks, ruts and sand, so the bead has to stay seated on the rim when pressure is low. A bead that slips can leave the tire partly off the seat, which is why bead retention features matter more on trail setups than on pavement. Bead Grip and the inner and outer humps are designed for that job.
Before buying, think about the tire you plan to run. Tire height and width change how the wheel sits in the fender, and offset and backspacing decide how far the wheel reaches toward the suspension. Write down your current tire size and clearance so you can compare them with this wheel before mounting.
After installation, recheck lug nut torque after the first few trail runs. Inspect the bead area each time you air down or air back up, and clean mud from the seat before remounting a tire so it seals evenly. Look over the inner lip and windows after rough use for cracks or bends.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70178587500 |
| Series | 701 Trail Series (MR701 Bead Grip) |
| Wheel diameter | 17 Inches |
| Wheel width | 8.5 Inches |
| Bolt pattern | 8 on 170 |
| Center bore | 131 |
| Offset | 0 |
| Backspacing | 4.75 |
| Construction | One-piece cast 356 aluminum, T6 heat treatment |
| Style | Windowed |
| Finish | Matte Black |
Vehicle fitment
The specifications name no vehicle, and no years or chassis codes are given. Method’s universal fit label is not a substitute for checking the hub, so compare the 8 on 170 bolt pattern and 131 center bore with your vehicle first.
Check the 8 on 170 bolt pattern and 131 center bore against your hub specifications. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the 8 on 170 bolt pattern and 131 center bore to your hub before mounting. Bead Grip is intended for lower pressures, so choose a setting that fits your tire and trail conditions.
What’s included
One Method Race Wheels 701 Trail Series wheel in Matte Black.
Not included: Lug nuts, valve stems, center caps and a tire are not supplied with this wheel.















