Overview
The Method Race Wheels 301 The Standard 16×8 has a machined silver finish and a 5 on 4.5 bolt pattern. Part number MRWMR30168012300 is a 16-inch, 8-inch-wide aluminum spoke wheel from the MR301 The Standard series.
Method Race Wheels describes its wheels as engineered for their intended use, with finite element analysis and field testing behind the design. The 8-inch width pairs with a 0 offset and 4.5 backspacing, and no vehicle is named, so judge fit on the measurements.
Key features
- Machined silver finish
- 16 by 8 inch aluminum spoke
- 5 on 4.5 bolt pattern with 83 center bore
- Offset 0 and backspacing 4.5
- Part of the MR301 The Standard series
- Engineering noted by the manufacturer
Width and offset clearance
An 8-inch width on a 0 offset places the wheel’s back face and spokes in a different spot than a narrower wheel with the same bolt pattern. That difference matters most near brake calipers, control arms and the inner fender lip. Measuring from the hub face to each of those parts before mounting helps avoid rubbing once the suspension moves.
Hub fit comes first. If the hub is larger than the center bore, hub-centric rings are the usual way to center the wheel without relying only on the lug studs. Clean the hub face, check that the wheel seats flat, and re-torque after the first few drives.
- Measure inner clearance to calipers and control arms
- Use hub-centric rings where the hub is larger than the bore
- Re-torque lugs after the first few drives
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30168012300 |
| Series | MR301 The Standard |
| Style | Spoke |
| Construction | Aluminum |
| Diameter | 16 inches |
| Width | 8 inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 83 |
| Offset | 0 |
| Backspacing | 4.5 |
| Finish | Machined, silver |
| Fitment | Universal Fit |
Vehicle fitment
This wheel is marked Universal Fit, so it is not matched to a specific model. Match the 5 on 4.5 pattern and 83 center bore to your hub, then check that the 8-inch width clears the caliper and fender.
An 8-inch width on a 0 offset sits differently than a narrower wheel, so clearance needs its own check. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
If your hub is larger than the 83 bore, hub-centric rings will be needed to center the wheel. A hub that is smaller than the bore leaves no way to seat it correctly.
What’s included
This is the wheel only. Not included: tire.











