Overview
The Method Race Wheels 501 Rally is a 17 by 8 aluminum spoke wheel in bronze, part number MRWMR50178012942. It is drilled for a 5 on 4.5 bolt pattern, with a center bore of 67, an offset of 42 and a backspacing of 6.2. The wheel belongs to the MR501 Rally series.
Method Race Wheels designs its 501 Rally for off-road racing, aiming to cut weight without giving up strength. Whether a hub accepts it depends on its measurements, not the series name.
Key features
- Bronze finish on a spoke design
- 17-inch diameter and 8-inch width
- 5 on 4.5 bolt pattern
- Center bore 67 and offset 42
- Backspacing 6.2 in the MR501 Rally series
Rally wheel setup
Rally-focused wheels are often run with more aggressive tires and greater suspension travel, so the wheel has to tolerate impacts and changing loads. Backspacing and offset decide inner clearance against suspension and brake parts, which becomes more important when the vehicle flexes or carries extra weight.
Before mounting, confirm that the hub and bore centering suit the wheel. Consider lug seat type and hardware quality, since trail use loads the studs in ways road driving does not. A rally wheel should be inspected after each event, especially at the bead and the lip.
- Check inner clearance at full suspension travel
- Match lug seat type to the wheel
- Inspect the lip and bead after hard landings
- Use a centering ring only when the hub requires one
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR50178012942 |
| Series | MR501 Rally |
| Diameter | 17 inches |
| Width | 8 inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 67 |
| Offset | 42 |
| Backspacing | 6.2 |
| Style | Spoke |
| Finish | Bronze |
| Construction | Aluminum |
Vehicle fitment
Fit depends on the vehicle. A 5 on 4.5 pattern with an offset of 42 narrows which hubs can take this wheel, so measure your hub before deciding.
The rally name refers to the series, not to a fitting vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 67 center bore against the hub, and use a hub-centric ring if the hub is smaller than the bore. With a backspacing of 6.2, inner clearance against suspension and brake parts should be checked before mounting.
What’s included
Only the wheel itself is covered here.
Not included: tires and lug hardware, bought separately.










