Overview
This 704 Trail Series wheel measures 17 by 8.5 inches in Matte Black. Part MRWMR70478555500 has a 5 on 5.5 bolt pattern, a 108 center bore and 0 offset. It is universal fit, so no year, make or model is tied to it.
The 704 is a one-piece cast 356 aluminum wheel with T6 heat treatment and a windowed style. Its Bead Grip design, patent pending, works on the tire bead seat to hold the tire more firmly when pressures drop off road. The wheel was developed with the off-road racing community in mind, and the design aims for less weight and more strength.
Key features
- Cast in one piece from 356 aluminum and T6 heat treated
- Patent-pending Bead Grip works with the tire bead seat for extra grip at reduced pressures
- Race-derived reinforced inner lip
- Bead seat safety humps on the inside and outside help control the tire and block de-beading
- Windowed styling in Matte Black
- The wheel is built to weigh less and resist more stress.
- Method’s engineering included Finite Element Analysis and repeated field tests
Five-lug fitment checks
Five-lug hubs have five studs on a single bolt circle, and the 5 on 5.5 spacing is a common alignment check. A wheel can look right yet still sit off the hub if the center bore is wrong, so verify the bore before torquing. Spacers or adapters change offset and load paths, and they are a separate decision that affects brake clearance and bearing life.
Once mounted, torque lug nuts in a star pattern and recheck after the first trail runs. Look for cracks around the spokes and inner lip after rock contact, and check the bead seat if the tire has slipped. Aluminum wheels can bend on hard impacts, and a bent wheel is better replaced than repaired.
- Verify center bore before torquing
- Recheck torque after the first trail runs
- Examine the inner lip after rock strikes
- Avoid spacers unless fit has been checked
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70478555500 |
| Series | MR704 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 108 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Windowed |
| Finish | Matte Black |
| Construction | One-piece cast 356 aluminum, heat treated to T6 |
| Fitment label | Universal Fit |
Vehicle fitment
Universal fit is Method’s label for this wheel, and no particular vehicle year, make or model is attached to it. A 5 on 5.5 bolt pattern and a 108 center bore must match the hub on your vehicle exactly, so check both before installing.
A 5 on 5.5 pattern names five lug holes and the bolt circle they share. Backspacing (4.75 here) is measured from the mounting face to the inner edge, and the 0 offset sets where the wheel sits against brakes and suspension parts.
Method names no vehicle generations or models for this wheel, so rely on your vehicle’s own hub measurements. Confirm your vehicle’s year, model and trim before ordering.














