Overview
The Method Race Wheels 307 Hole 17×8.5 in Matte Black, part number MRWMR30778560500, is built from aluminum with a 6 on 5.5 bolt pattern and a 108 center bore. It belongs to the MR307 Hole series, where the Hole style face is the defining look.
The offset is 0 and the backspacing is 4.75. Each wheel in the range is engineered and field tested, and the design aims to minimize weight while increasing strength.
Key features
- Hole-style face in Matte Black
- 17×8.5 size in aluminum construction
- 6 on 5.5 bolt pattern with a 108 center bore
- Zero offset with 4.75 backspacing
- Method says each design was checked with finite element analysis and field tests
- Series aimed at the off-road racing community
Why the bore matters
The center bore is the first point of fit on any wheel, and a bore that is too large relies on hub-centric rings to center the load. Without centering, the lug studs carry the weight and can wear or loosen over time. A bore that is too small will not seat on the hub at all, so measure before buying.
Most mounting problems come from skipping that check. Once the bore is confirmed, mount the wheel, tighten the lugs in a star pattern and re-check after the first drive. Keeping the mounting surfaces clean helps the wheel sit flat and reduces vibration.
- Measure the hub before ordering
- Use hub-centric rings when the bore is larger
- Clean the mounting surfaces
- Re-check lug torque after the first drive
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30778560500 |
| Series | MR307 Hole |
| Style | Holes |
| Finish | Matte Black |
| Construction | Aluminum |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | 0 |
| Backspacing | 4.75 |
Vehicle fitment
Vehicle makes and model years are not confirmed for this wheel. Use the 6 on 5.5 pattern, 108 center bore, zero offset and 4.75 backspacing as the match points against your vehicle’s specifications.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 108 center bore is the main fit check. A hub larger than the bore requires hub-centric rings, and a smaller hub will not take the wheel.
What’s included
The wheel only. It comes without a cap or hardware.
Not included: Tires and lug hardware are not included.










