Overview
The MagnaFlow 3391005 is a universal California catalytic converter with a 2.25 in. inlet and outlet, an 11 in. length, a 5 in. width and an 11 in. overall length. It fits trucks, SUVs and vans from 1975 to 1995, including the Chevrolet S10 and Blazer, Ford Bronco and F-Series, GMC S15 and Sonoma, and Jeep Cherokee XJ, Wrangler YJ and Grand Cherokee ZJ.
Key features
- 2.25 in. inlet and outlet
- Universal California catalytic converter design
- Overall length 11 in. and width 5 in.
- Not air tube kit adaptable
Sizing a universal converter
Universal converters are sold to fit many vehicles, so the fit depends on the exhaust you already have. Start with the inlet diameter, then check the overall length against the space between the rear axle and the floor. A converter that is too long can rub against the body or the spare tire area, and one that is too short can leave gaps that cause leaks.
Older trucks often have rusted pipes near the joints. Cut back to sound metal before fitting the new converter, and use new clamps or flange gaskets so the joints seal properly. Reusing old, stretched clamps is a common cause of exhaust leaks after a swap.
- Cut back rusted pipe to sound metal before fitting
- Replace clamps and flange gaskets rather than reusing them
- Check clearance around the heat shield after assembly
Specifications
| Brand | MagnaFlow Exhaust |
|---|---|
| Part number | 3391005 |
| Inlet and outlet | 2.25 in. |
| Length | 11 in. |
| Width | 5 in. |
| Overall length | 11 in. |
| Air tube kit adaptable | No |
Vehicle fitment
The manufacturer fitment list covers 1975–1995 models, including 1982–1993 Chevrolet S10 and S10 Blazer trims, 1975–1983 Ford Bronco, 1975–1980 Ford F-150, 1993–1995 Jeep Grand Cherokee ZJ, and 1987–1995 Jeep Wrangler YJ in Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
Vehicles outside 1975–1995 are not covered, and many models appear only for certain years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the converter is not air tube kit adaptable, match the 2.25 in. inlet and outlet to your pipes and confirm the 11 in. length fits the space. Let the exhaust cool before you start.
What’s included
Clamps, gaskets and hangers may be needed for the joint, so check the package contents against your installation before starting.









