Overview
The MagnaFlow 12773 is a satin stainless steel straight-through muffler with 4-inch tubes, made for universal-fit exhaust systems rather than a named vehicle. Its free-flowing perforated stainless core is wrapped in stainless mesh and packed with acoustical fiber fill, which MagnaFlow says gives a smooth, deep tone with no sound degradation over time.
The body is 100% stainless steel and lap-joint welded for a rugged build suited to severe conditions. The muffler carries a Lifetime Warranty.
Key features
- 100% stainless steel body, lap-joint welded for a solid build
- Straight-through perforated stainless steel core for free exhaust flow
- Stainless mesh wrap around the core
- Acoustical fiber fill for a smooth, deep tone
- Centered inlet and centered outlet
- Lifetime Warranty stated by MagnaFlow
Matching 4-inch exhaust systems
A 4-inch muffler only works with pipes of the same diameter, and the reducer or coupler at each end has to seal well. Measure the pipe outside diameter before buying, then check that the centered inlet and outlet line up with the factory pipe route. Larger tubes move more exhaust volume, so the pipe run and tailpipe should be sized to match rather than mixed with smaller sections.
Stainless construction holds up well to road salt, but the joints at the hangers and clamps are the first places to wear. Each season, check for rust at the seams, cracks near the inlet, and loose hangers that let the body rattle. Replacing worn clamps at the same time as the muffler keeps the connection tight and avoids leaks at the pipe joints.
Specifications
| Brand | MagnaFlow Exhaust |
|---|---|
| Part number | 12773 |
| UPC | 841380001436 |
| Muffler type | Straight through |
| Material | Stainless steel |
| Finish | Satin |
| Tube size (inlet/outlet) | 4 inches / 4 inches |
| Inlet location | Centered |
| Outlet location | Centered |
| Fitment | Universal fit |
Vehicle fitment
MagnaFlow files this muffler as universal fit, so no year, make, model or trim is attached. Compare the 4-inch tube size and the centered inlet and outlet with your current exhaust before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 4-inch tubes must match the pipe diameter on your exhaust, so measure before fitting. Support the vehicle on jack stands and let the exhaust cool before working underneath.
What’s included
Check the package contents against your installation before starting.









