Overview
The MagnaFlow 13645 is an XL 3 Chamber muffler with 2.25-inch tubes, an offset inlet and an offset outlet. It is a universal fit part, so no year, make, model or trim is tied to it. Large diameter perforated tubing and strategically placed sound baffles reduce resonance and are designed to help the engine make horsepower.
Calibrated tuning gate openings let portions of the sound waves pass. The large perforated core avoids the restriction of a louvered core. The body is either aluminized steel or stainless steel, so verify the material before you fit it.
Key features
- Large diameter perforated tubing
- Sound baffles with calibrated tuning gate openings
- Large core free of louvered restriction
- Chambered design for resonance control
- 2.25-inch inlet and 2.25-inch outlet tubes
- Offset inlet and offset outlet
Offset ends and install planning
Two offset ends mean the muffler body will sit at an angle to the straight run of pipe, so the install is more about alignment than bolting on. Before you lift the car, dry-fit the muffler to see how the inlet and outlet line up with the pipes. Leave room for the hangers to hang straight, since a twisted body can crack at the welds or rub on the floor pan over time.
Pipe diameter matters as much as position. A 2.25-inch tube will not seal well against a smaller or larger pipe, so measure the pipe before ordering. Heat from the exhaust can soften old rubber hangers, so inspect them whenever the muffler is off. Large perforated cores are often paired with a fresh set of clamps when the system is rebuilt.
- Dry-fit before final tightening
- Measure pipe diameter at both ends
- Replace brittle rubber hangers
Specifications
| Brand | MagnaFlow Exhaust |
|---|---|
| Part number | 13645 |
| UPC | 841380001641 |
| Muffler type | Chambered (XL 3 Chamber) |
| Material | |
| Tube size (inlet/outlet) | 2.25 inches / 2.25 inches |
| Inlet location | Offset |
| Outlet location | Offset |
| Fitment | Universal fit |
Vehicle fitment
Universal fit is the stated fitment, so this muffler is not matched to a year, make, model or trim. Check the 2.25-inch tube size and both offset positions against your pipes.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both ends are offset, so line up the body with your pipes before tightening anything and check clearance to nearby parts. Support the car on stands and let the exhaust cool first.
What’s included
Check the package contents for clamps, hangers and gaskets before installing the muffler.









