Overview
The MagnaFlow 13146 is a Red Pack Series glasspack muffler with a 2.5-inch centered inlet and a 2.5-inch centered outlet. It has a free-flowing, straight-through perforated core and acoustical packing material that produces a smooth, deep tone. It is a universal fit muffler.
Glasspack mufflers like this one are a common choice for owners who want a deeper exhaust note than a stock muffler. The aluminized steel body and the packing are meant to support long life and keep the sound from degrading over time.
Key features
- Straight-through perforated core for free exhaust flow
- Acoustical packing material for a smooth, deep tone
- Glasspack design
- Aluminized steel construction
- Centered inlet and centered outlet locations
- 2.5-inch inlet and 2.5-inch outlet tube size
Choosing a glasspack tone
A glasspack muffler trades some quiet for a deeper exhaust note, so the choice comes down to how much sound you want on the road. Packing material is the main tuning element here, and it gradually wears down with heat and moisture over time. The tone change is most noticeable under hard throttle and at steady highway speeds.
Glasspack units are usually installed as part of a larger exhaust, so the pipes ahead of them and the hangers that hold them matter as much as the can itself. Worn hangers let the muffler sag and stress the joints. Inspect welds and seams periodically, and check for rattles that may point to loose internal parts. Keep the outlet clear of the rear bumper and bodywork when setting its position.
Specifications
| Brand | MagnaFlow Exhaust |
|---|---|
| Part number | 13146 |
| UPC | 888563013251 |
| Type | Glasspack muffler |
| Material | Aluminized steel |
| Tube size (inlet/outlet) | 2.5 inches / 2.5 inches |
| Inlet location | Centered |
| Outlet location | Centered |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit part, so no specific year, make, model or trim applies. Confirm fit for your vehicle’s year, model and trim before ordering.
Because this is a vehicle-sized exhaust component, check the 2.5-inch tube size and the centered inlet and outlet locations against your current muffler and pipe before installing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the inlet and outlet positions and the 2.5-inch tube size with your existing exhaust before cutting or welding. Exhaust components get very hot, so let the system cool and wear eye protection while working.
What’s included
Check the package contents against your installation before starting, since clamps and hangers may need to be sourced separately.












