Overview
The Low Range Offroad Front Electric E-Locker Switch, part number LRODIY-ELSF, is a DPDT switch kit for do-it-yourself wiring of a front Toyota Electric E Locker. DPDT switches are a common choice for this type of wiring.
The switch is wired independently of the factory Toyota wiring and is not used with the factory e-locker computer. A short harness to the differential is needed, and a common approach is splicing 6-lead trailer wire into the factory differential harness.
Key features
- DPDT (double pole double throw) switch, which has two circuits that each switch between two positions
- Written for wiring a Toyota Electric E Locker
- Designed to be wired independently of the factory Toyota wiring
- Not for use with the factory e-locker computer
Before wiring an e-locker switch
An e-locker switch sends power to the locker so it can engage and release. Because the switch controls a circuit that moves the differential, keep the wiring simple and fused, and route cables away from heat, moving parts and exhaust. A clear label on each switch position avoids confusion when the locker is engaged on the trail.
DPDT switches have two circuits, so match each wire to the correct terminal before powering the system. Test the switch with the vehicle stationary, confirm the indicator behaves as expected, and check connections for corrosion. Weatherproof connectors and a secure dash mount help the wiring last in mud and water.
- Label switch positions and wires before connecting
- Use fused power feeds and correctly sized wire
- Test engagement with the vehicle stationary
- Seal connectors against water and mud
Specifications
| Brand | Low Range Offroad |
|---|---|
| Part number | LRODIY-ELSF |
| Position | Front |
| Switch type | DPDT (double pole double throw) |
| Fitment | Universal fit |
| Wire gauge or harness | 6-lead wire commonly used; short harness to the differential required |
Vehicle fitment
It is a universal fit and is written for wiring a Toyota Electric E Locker.
Because the switch is wired to a Toyota e-locker circuit, confirm the locker and axle match before wiring. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The switch is wired separately from the factory Toyota wiring, so the factory e-locker computer is not used. A short harness to the differential is needed, and Low Range suggests splicing 6-lead trailer wire into the factory differential harness.
What’s included
Check the package contents against your installation before starting.











