Overview
The Pro Comp Alloy Wheels lip bolt, part number 603811000, is a replacement bolt for wheels in the 39 series. Lip bolts secure the outer lip of a wheel, so a replacement is used when the original is lost or damaged.
The bolt is made for the 39 series. Compare its thread, length and finish with the bolt it replaces before fitting it to the wheel.
Key features
- Replacement lip bolt
- For the 39 series
Checking the bolt seat
The seat is the area of the wheel where the bolt head rests. A worn or corroded seat can reduce clamp force even when the bolt is tightened correctly. Look for rust, paint chips, or bright marks where the head sits, and clean the area before refitting the bolt.
Bolts in the same series can still differ in head shape and length, so measure the original before choosing a replacement. A bolt that is too long may bottom out in the hole, while one that is too short may not seat fully. If a bolt is only slightly loose, tighten it and inspect it again after a short drive.
Repeated loosening usually has a cause that can be found. Check the seat, the threads and the bolt length in that order before assuming the bolt itself is at fault.
- Measure the original length before ordering
- Clean the seat with a wire brush
- Re-check the bolt after a short drive
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 603811000 |
| UPC | 844658040755 |
| Series | 39 |
Vehicle fitment
The bolt suits the 39 wheel series, not a particular vehicle. Confirm the series designation on your wheel first.
What’s included
One lip bolt is included. Count the bolts your wheel needs before ordering.









