Overview
The Pro Comp Alloy Wheels lip bolt, part number 505012000, is a replacement bolt for the PXA 50 series of wheels. Lip bolts secure the outer lip of the wheel, so this bolt is used when an original is lost or damaged.
The bolt is made for the PXA 50 series. Compare its thread, length and finish with the bolt you are replacing before fitting it.
Key features
- Replacement lip bolt
- For the PXA 50 series
Replacing a lost lip bolt
Lip bolts secure the outer lip of the wheel, so a missing bolt leaves that section of the rim less stable. Replace it before driving, and check the remaining bolts for looseness or wear. Keep spares of the same thread and length on hand if the wheel is used off-road, where rocks and branches can strike the rim.
Clean the bolt seat before installing the replacement. Corrosion or debris under the head can change clamp force and make the bolt appear tight when it is not. Tighten to the specified value for your wheel, and recheck after the first few drives since new hardware can settle.
If an original bolt is removed for inspection, look at its threads and head before reuse. Rounded heads and stretched threads point to a bolt that should be replaced rather than refitted.
- Match thread and length to the original
- Clean the seat and threads before fitting
- Inspect the lip for dents around the bolt hole
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 505012000 |
| UPC | 844658043107 |
| Series | PXA 50 |
Vehicle fitment
It is made for the PXA 50 series of wheels, not for a named vehicle. Confirm the series on your wheel first.
What’s included
One lip bolt is included. Confirm the quantity you need against the number of lips on your wheel.









