Overview
The K&N 71-9039 Blackhawk Induction Air Intake Kit is an air intake system for the 2016–2018 Toyota Tacoma with the 3.5L V6. It replaces the factory air filter and air intake housing with a mandrel-bent aluminum tube and a K&N high-flow filter, for owners who want more airflow and a sharper throttle response.
The Blackhawk is a free-flowing system that lets the engine draw in a larger volume of air than the stock intake, which adds power and acceleration. The estimate is 15.57 HP at 5446 RPM, and a horsepower gain is guaranteed. The black finish and welded, engraved plate show under the hood, and the oversized cone-shaped filter is built to stay in service for a long time between cleanings.
Key features
- Mandrel-bent aluminum intake tube with a textured black powder-coated finish
- Welded, engraved K&N plate on the tube
- Oversized cone-shaped filter made from oil-free synthetic filter media
- Filter is washable and reusable, usable for up to 100,000 miles before cleaning depending on driving conditions
- Heat shield included with the high-flow filter
Long-term intake care
The Blackhawk changes how the 3.5L V6 breathes, so the intake tube and filter should be part of routine checks. Look at the tube for hairline cracks around the bends and confirm the clamps are snug. The factory mass air sensor and crankcase vent hose should be checked for proper routing, since a pinched hose can cause a rough idle.
The oversized filter stays in service for a long time, but it still needs inspection. Clean it when it looks dirty or after dusty trips, and let it dry fully before refitting. Replace the filter if the media tears or the rubber seal hardens. The heat shield should also be checked for loose fasteners.
- Check tube bends for hairline cracks
- Confirm the crankcase vent hose stays clear
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 71-9039 |
| UPC | 24844363886 |
| Engine | 3.5L V6 |
| Tube finish | Textured black powder-coat |
| Estimated horsepower gain | 15.57 HP at 5446 RPM |
| Filter media | Oil-free synthetic |
| Filter service interval | Up to 100,000 miles, depending on driving conditions |
| Warranty | K&N Million Mile Limited Warranty |
| California | Not legal for use in California |
Vehicle fitment
The kit is a direct fit for the 2016–2018 Toyota Tacoma in the Limited, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport trims.
The 2016–2018 years do not cover other Tacoma model years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
K&N lists typical installation at 90 minutes or less, using the existing factory mounting points and commonly available tools. The tube is designed to accommodate the factory mass air sensor and the crankcase vent hose, so both connections are routed around it during the swap.
What’s included
The kit comes with the black intake tube, the K&N high-flow air filter with heat shield, and the engraved K&N plate welded to the tube.














