Overview
The K&N 77-9025KP is a 77 Series high flow air intake kit for 2005 to 2011 Toyota Tacoma trucks in Base, Pre Runner and X-Runner trim. It is a direct fit that replaces the factory airflow assembly, including the filter, air box and air path.
It uses a cold-air design with a partial-enclosure filter housing and an oil-type filter, and the inlet tube is included. The estimated gain is 10 HP. It is not legal for highway use where California emission regulations apply.
Key features
- Cold air intake design
- Partial enclosure filter housing
- Oil-type filter
- Inlet tube included
- Estimated gain of 10 HP.
- Free-flowing mandrel bent aluminum tube
Cold air considerations
A cold air path draws air from outside the engine bay, so placement and sealing matter. Check that the intake tube sits clear of the radiator, exhaust and hot engine parts after installation. Heat soak from nearby components can reduce the cooling benefit, so keep the path away from hot surfaces wherever possible.
Water and debris are the main concerns with a cold air intake on a Tacoma that sees trail use. Shallow water splashes can reach the open area, so avoid deep crossings with the filter exposed and check the filter after dusty or wet runs. Inspect the inlet tube for cracks or loose connections, since an air leak after the air box is removed lets unfiltered air reach the engine.
- Keep the intake tube clear of hot engine parts
- Check the filter after wet or dusty trail use
- Tighten clamps at the first service interval
Specifications
| Brand | K&N |
|---|---|
| Part number | 77-9025KP |
| UPC | 24844112477 |
| Intake type | Cold Air |
| Filter housing type | Partial Enclosure |
| Filter type | Oil |
| Inlet tube | Included |
| Fitment type | Direct Fit |
| Estimated horsepower gain | 10 HP |
| Highway use | Not legal in states adopting California emission regulations |
Vehicle fitment
It fits the 2005–2011 Toyota Tacoma in Base, Pre Runner and X-Runner trim.
Tacoma model years 2012 and later are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The cold-air path replaces the factory air box, so the box and its filter come out during installation. Confirm the steps for your setup before starting.
What’s included
The inlet tube is included. Check the packing contents against your installation before starting.









