Overview
The K&N 77-2586KS is a 77 Series High Flow Intake Kit for the 2012–2014 Ford Edge in the Limited, SE and SEL trims. It completely replaces the factory airflow assembly, including the filter, air box and air path.
A high flow intake swaps the stock air box and tubing for a free-flowing, mandrel-bent aluminum tube and a washable filter. Mandrel bending means the tube is bent around a shaped form, a common method for keeping the tube’s inside diameter steady through the bend. The kit is guaranteed to increase horsepower and has an estimated gain of 8 HP.
Key features
- Free-flowing mandrel-bent aluminum tube
- Replaces the complete factory airflow assembly, including filter, air box and air path
- Washable and reusable lifetime air filter
- Guaranteed to increase horsepower, with an estimated gain of 8 HP
- Easy to install, usually in 90 minutes or less
- Backed by K&N’s Million Mile Warranty
- Made in the U.S.A.
- 50 State Legal, with CARB E.O. # D-269-48
Maintenance after a swap
A swap that removes the air box changes where dust and water can reach the engine. A washable filter in an open path gets more exposure than a sealed stock box, so an inspection schedule is worth setting. Check the filter edges, the tube’s inner surface and any signs of moisture after heavy rain.
Mandrel-bent tubes keep a consistent inside shape through each bend, but the joints still need firm clamps. Retighten the clamps after the first few drives, since heat cycles can loosen them. Route the sensor connector so it cannot rub against the aluminum tube.
- Inspect the filter after heavy rain or dusty roads
- Recheck clamps after the first drives
- Watch for moisture inside the tube
- Keep the sensor connector routed away from the tube
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 77-2586KS |
| UPC | 24844346308 |
| Series | 77 Series High Flow Intake Kit |
| Tube | Free-flowing mandrel-bent aluminum |
| Air filter | Washable and reusable lifetime filter |
| Estimated horsepower gain | 8 HP |
| Install time | Usually 90 minutes or less |
| CARB status | 50 State Legal, CARB E.O. # D-269-48 |
| Warranty | Million Mile Warranty |
| Made in | U.S.A. |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits the 2012–2014 Ford Edge in the Limited, SE and SEL trims.
Ford Edge model years outside 2012 through 2014 and other Ford models do not fit. Confirm fit for your year, model and trim before ordering.
Installation notes
Installation is fairly simple and usually takes 90 minutes or less. The kit replaces the factory air box, so the stock air box is not reused.
This kit is 50 State Legal with CARB E.O. # D-269-48. Some 77 Series intakes are not legal in California, so check the CARB status for your vehicle before use.
What’s included
The kit completely replaces the factory airflow assembly, including the filter, air box and air path. Confirm the package contents before installing.
















