Overview
The K&N 57-2581 FIPK air intake system replaces the factory air filter and air intake housing on 2011–2014 Ford F-150 V8 models. It fits the FX2, FX4, King Ranch, Lariat, Platinum, STX, XL and XLT trims.
The intake smooths and straightens airflow to reduce intake restriction, so the engine can draw in more air. It is designed to improve throttle response and engine sound, and it is designed to add horsepower.
The kit includes a chrome topped K&N high-flow air filter and a heat shield that installs into the lower air box space. Air is routed through an aerodynamically engineered tube into the throttle body, and the tube accommodates the factory mass air sensor, crankcase vent hose and EVAP hose.
The oversized cone-shaped filter is rated by K&N for up to 100,000 miles before service, depending on driving conditions. The filter is washable and reusable and carries the K&N Million Mile Limited Warranty.
Key features
- Designed to increase horsepower
- Designed to improve throttle response and engine sound
- Heat shield installs into the lower air box space
- Tube accommodates the factory mass air sensor, crankcase vent hose and EVAP hose
- Filter service life of up to 100,000 miles, depending on driving conditions
- Washable and reusable lifetime air filter
- Full enclosure filter housing
Signs the factory parts are worn
Factory air boxes and intake tubes age with heat cycles. Over time the rubber couplers can crack, the clips can break and the housing can warp near the engine, which lets unfiltered air in. If the truck shows rough idle, a whistling sound or a check engine light tied to airflow, look at the intake joints before assuming the sensor is at fault.
The new kit relies on existing mounting points, so the bolts and brackets should be tightened and inspected after installation. Heat shields can rub on nearby wiring if they shift, so secure them and check the routing. Keep the filter in its housing at all times, since debris that bypasses the filter reaches the throttle body and sensors quickly.
- Check couplers for cracks
- Confirm the heat shield clears wiring
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-2581 |
| UPC | 24844361271 |
| Series | 57 Series Performance Intake Kit |
| Intake type | Cold air |
| Filter housing type | Full enclosure |
| Filter type | Oil |
| Inlet tube | Included |
| Fitment type | Direct fit |
| Service interval | Up to 100,000 miles, depending on driving conditions |
| Emissions status | 50 State Legal, CARB EO D-269-48 |
| Warranty | K&N Million Mile Limited Warranty |
Vehicle fitment
Fits only the 2011–2014 Ford F-150 V8 in FX2, FX4, King Ranch, Lariat, Platinum, STX, XL and XLT trims.
Ford F-150 years outside 2011–2014 and other vehicles are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit mounts at the existing factory points. Installation is relatively easy with a screwdriver, a ratchet set and several wrenches.
What’s included
The kit includes the chrome-topped high-flow filter, the heat shield and the intake tube. Tools are not included.









