Overview
The K&N 57-3043 is a cold air intake that replaces the factory airflow assembly, including the filter, air box and air path. It is built around a high density polyethylene inlet tube and a reusable oil-type air filter.
The estimated gain is 19 HP. The housing is a partial enclosure design. Confirm fit for your vehicle’s year, model and trim before buying, because a 57 Series name alone does not confirm a match.
Key features
- Cold air intake with a partial enclosure filter housing
- Inlet tube included
- High density polyethylene tube for free-flowing air
- Washable, reusable oil-type filter that K&N rates for lifetime use
- Estimated gain of 19 HP.
- Installation usually takes 90 minutes or less.
- Made in the U.S.A., with K&N’s Million Mile Warranty
- 50 State Legal, CARB E.O. # D-269-34
Pre-installation checklist
Replacing the whole factory airflow path changes more than the filter. The air box, the tubing and the filter location all change, so take a few minutes to photograph the stock setup and the routing of any sensor wires before removing anything. That record makes reassembly faster and helps you spot a loose connection later.
Engine bay heat matters for any cold air setup. Keep the intake tube away from exhaust components and hot surfaces, and check that the new path does not rub against wiring or the radiator support. A cool, clean air source is the goal, so any tube that heat soaks after a long idle is worth rerouting.
- Label every hose and connector before disconnecting it
- Confirm the battery is disconnected before working near the sensor
- Check the tube for rubbing points after the first drive
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-3043 |
| UPC | 24844109415 |
| Series | 57 Series Performance Air Intake Kit |
| Intake type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Oil |
| Inlet tube | Included |
| Tube material | High density polyethylene |
| Estimated horsepower gain | 19 HP |
| Emissions approval | CARB E.O. # D-269-34, 50 State Legal |
| Fitment type | Direct Fit |
| Warranty | Million Mile Warranty from K&N |
| Country of manufacture | Made in the U.S.A. |
Vehicle fitment
It is a direct fit design. Do not assume a match from the 57 Series name alone; confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation usually takes 90 minutes or less. Because the kit replaces the factory airflow assembly, remove the stock filter, air box and air path before fitting the inlet tube and new filter.
What’s included
The inlet tube is included. The kit is a full replacement for the factory airflow assembly.
Not included: Check the package contents against your installation before starting.









