Overview
The K&N Filter 57-1521 is a 57 Series performance air intake kit for the 1991–1995 Jeep Wrangler (YJ). It is a cold air intake that takes the place of the factory filter, air box and air path, pairing a free-flowing high density polyethylene tube with a washable oil-type air filter. K&N estimates a gain of 13 HP from the swap.
The kit is a cold air intake that draws air from outside the engine bay. It is designed to smooth and straighten airflow so the engine can take in more air through the throttle body. The kit is Proudly Made in the U.S.A. and is 50 State Legal under CARB E.O. number D-269-22. It carries the Million Mile Warranty, and the filter is designed to be washed and reused.
Key features
- Takes the place of the factory filter, air box and air path
- Free-flowing high density polyethylene intake tube
- Washable and reusable lifetime oil-type air filter
- Estimated gain of 13 HP
- Cold air intake type with partial enclosure filter housing
- Direct fit design with inlet tube included
- 50 State Legal with CARB E.O. # D-269-22
Choosing a YJ intake
A YJ’s engine bay is tighter than many newer layouts, so measure the space around the air box and throttle body before buying parts. The tube and filter should sit clear of the steering components, hoses and wiring. Think about the rest of the setup too, since a cold-air intake works best when the exhaust and ignition are in good condition.
Older trucks often show age in their hoses and clamps, so inspect those parts when you install the intake. A cracked hose or a loose clamp can let unfiltered air into the engine. Plan a quick check after the first drives, especially on rough roads, and keep spare clamps on hand.
- Measure clearance around the throttle body before ordering
- Inspect hoses and clamps at the same time as the intake
- Check the filter after rough roads and dusty trails
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-1521 |
| UPC | 24844100542 |
| Estimated horsepower gain | 13 HP |
| Intake type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Oil |
| Inlet tube | Included |
| Fitment type | Direct fit |
| CARB E.O. number | D-269-22 |
| Made in | U.S.A. |
Vehicle fitment
This kit fits the 1991–1995 Jeep Wrangler (YJ) in Base, Islander, Renegade, SE and Sahara trims.
It fits the YJ generation only. Later Wrangler generations such as the TJ, LJ and JK are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
K&N describes installation as usually taking 90 minutes or less. Because the tube and filter occupy the space of the factory airflow parts, check clearance around the engine bay before final tightening. Disconnect the battery before working near any electrical connections.
What’s included
Installation usually takes 90 minutes or less. Because the tube and filter take the space of the factory airflow parts, check clearance around the engine bay before final tightening. Disconnect the battery before working near any electrical connections.












