Overview
The Kentrol 54 Inch Front Stainless Steel Bumper with Holes, part number 30429WH, is a 304 grade stainless steel bumper with holes in the face of the bumper. It does not have pre-drilled license plate mounting holes.
The bumper is made from 304 grade stainless steel, and the stainless steel is designed to resist rust. An occasional waxing helps keep the mirror-like shine. The tube is 4 inch x 2 inch diameter, and stainless steel hardware is included.
Key features
- 304 grade stainless steel
- Holes in the face of the bumper
- No pre-drilled license plate mounting holes
- Listed tube size of 4 inch x 2 inch diameter
- Includes stainless steel hardware
- Mirror-like stainless finish
Rear mounting and bumper care
A front bumper is often chosen for protection against brush and rock strikes. Before buying, confirm how it attaches to your vehicle, since the mounting method determines fit. Test the alignment of the bumper against the mounting points before fully tightening anything.
Rear installation adds a second set of mounting considerations. The brackets, the bumper tube and the frame attachment points all need to line up, so test-fit the parts on a flat surface before final tightening. Keep the bracket hardware sorted so each bolt goes back in its original position.
Stainless steel is designed to resist rust, but road salt and mud still leave deposits. Rinse the bumper after trips, dry it, and use a light wax to maintain the mirror finish. Inspect bolts and brackets after rough driving.
- Test-fit brackets before final tightening
- Check frame attachment points for rust
- Recheck fasteners after rough trail use
Specifications
| Brand | Kentrol |
|---|---|
| Part number | 30429WH |
| UPC | 812421020327 |
| Product type | Front bumper |
| Length | 54 inch |
| Material | 304 grade stainless steel |
| Finish | Stainless steel |
| Face | With holes |
| License plate holes | Not pre-drilled |
| Tube size | 4 inch x 2 inch diameter |
| Hardware | Included |
| Width | Full |
| Light mounts | Not included |
| Winch mount | Not included |
| D-ring mount | Not included |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Rear mounting requires part 297255 rear bumper brackets for the CJ 1976–86.
Confirm fit for your vehicle’s year, model and trim before ordering. Check the mounting dimensions against your vehicle before installation.
Installation notes
To mount this bumper on the rear of a vehicle, part 297255 rear bumper brackets for the CJ 1976–86 are needed.
What’s included
The bumper and stainless steel mounting hardware.
Not included: rear bumper brackets (part 297255) when mounting on the rear.












