Overview
The KC HiLites Gravity LED Daylighter Driving Light System (Chrome), part number 652, is a pair of 6-inch Gravity LED Daylighter lights in a stainless steel housing. KC lists 20 W LED bulbs in each light, 40 W per pair pack, with the system finished in chrome.
The 6-inch Daylighter uses two Cree XML2-T6 10 W LEDs, a competition-proven flexible base for easy and accurate aiming, a hard-coated polycarbonate lens and protective ABS stone guards. KC lists each light at 2,104 raw lumens, 2,150 lux at 10 meters and 215,000 candela in its spot beam figures.
The system includes a pre-terminated, weatherproof sealed 2-pin Deutsch connector harness and a 30 amp illuminated switch with a switch panel. The rated output is for a spot beam, so confirm the pattern you need, spot or driving, before fitting.
Key features
- Stainless steel housing with chrome finish
- Two 6-inch Gravity LED Daylighter lights
- Two Cree XML2-T6 10 W LEDs per light
- Flexible base for aiming
- Hard-coated polycarbonate lens and ABS stone guards
- Sealed 2-pin Deutsch harness and 30 amp illuminated switch
Choosing a spot or driving beam
A spot beam throws light a long way down the trail in a narrow column, which suits high-speed fire-road driving where the distance ahead matters most. A driving pattern spreads the light wider and closer, so the edges of the road are easier to read at lower speeds. Picking the pattern before the install saves a second round of aiming and mounting.
The harness and switch panel are the parts that most often get rushed. Keep the sealed connectors clear of standing water and route the cable away from hot exhaust and moving linkages. Fuse the circuit at the battery and mount the switch panel where it can be reached without looking down.
- Match the beam pattern to how you drive
- Keep stone guards fitted for gravel roads
- Re-aim the lights after any change in mounting height
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | 652 |
| UPC | 84709006525 |
| Series | Gravity LED Daylighter |
| Sold as | Kit |
| Light shape | Round, 6 inch |
| Bulbs | 20 W LED bulbs, 40 W per pair pack |
| LEDs per light | Two Cree XML2-T6 at 10 W |
| Raw lumens | 2,104 per light (spot beam figure) |
| Lux at 10 meters | 2,150 per light (spot beam figure) |
| Candela | 215,000 per light (spot beam figure) |
| Lens | Hard-coated polycarbonate |
| Housing | Stainless steel, chrome |
| Switch | 30 amp illuminated switch with panel |
| Wiring | Sealed 2-pin Deutsch harness |
Vehicle fitment
The Daylighter driving light system is a universal fit, so it is not built for one vehicle. The flexible stem base lets you aim each light, and the mounting spot is chosen for each vehicle. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Use the pre-terminated harness and the 30 amp switch panel, and fuse the circuit at the battery. Aim each light with the flexible base after it is secured. Check local rules on driving lights before using them on a road vehicle.
What’s included
The system includes two 6-inch Daylighter lights, two KC light guards, the sealed harness and the 30 amp illuminated switch with its panel.









