Overview
The KC HiLites Gravity LED Daylighter Driving Light System, model 653, is a pair of 6 inch round LED driving lights with a complete wiring kit, universal fit. Each light uses Cree XML2-T6 10 W LEDs, a flexible base for aiming and a hard-coated polycarbonate lens, with ABS stone guards for protection. It is a driving light with a spread beam, meant to add wide forward light rather than low fog-style illumination.
Key features
- Spread (driving) beam pattern with 2,104 raw lumens per light
- Flexible base for easy and accurate aiming
- Hard-coated polycarbonate lens and ABS stone guards
- Cree XML2-T6 10 W LEDs in each light
- Pre-terminated, weatherproof sealed 2-pin Deutsch connector wiring harness
- 30 amp illuminated switch with switch panel
Choosing where the lights go
Driving lights with a spread beam are best used where wide forward light helps, such as slow trail work or open roads with few oncoming vehicles. Consider the height of the mount, the clearance above the bumper or bar and whether the lights will be seen by other drivers. Place each light so its beam covers the ground you need without shining into other vehicles.
Once the lights are placed, check that the stem mount is solid and that the harness has enough slack for suspension movement. Connections should stay sealed, and the switch panel should be within easy reach. Inspect the lens and housing after rough trips, since debris can pit the surface and reduce light output over time.
Specifications
| Brand | KC HiLites |
|---|---|
| UPC | 84709006532 |
| Light type | Driving light system, sold as a kit |
| Light shape | Round, 6 inch |
| Lens color | White |
| Bulb type | LED, 20 W per light (40 W per pair) |
| LED source | Two Cree XML2-T6 10 W LEDs |
| Lens | Hard-coated polycarbonate |
| Housing | Black powder coat |
| Mounting | Stem mount with flexible base |
| Beam pattern | Driving / spread |
| Raw lumens | 2,104 per light (spread beam) |
| Illuminance | 1,310 lx at 10 meters per light (spread beam) |
| Candela | 131,000 cd per light (spread beam) |
| Switch | 30 amp illuminated, with switch panel |
| Wiring | Pre-terminated weatherproof sealed 2-pin Deutsch connector harness |
Vehicle fitment
Being universal fit, it is not made for a particular year, make or model, so the mounting surface and location on your vehicle decide how it installs.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The harness is pre-terminated, so the lights plug into the wiring with no splicing. Run the power through a fused relay, and check local rules on driving lights before using them on public roads.
What’s included
Two all steel 6 inch Gravity LED Daylighters, the weatherproof wiring harness and a 30 amp illuminated switch with switch panel.









