Overview
The KC HiLites 3 Inch C-Series C3 LED System, model 330, is a pair of 3 inch square 12 W LED spot lights with a clear lens, universal fit. Each light has a die-cast aluminum housing, a Lexan lens and CREE LEDs rated at 1,080 raw lumens. The system includes the die-cast brackets and deluxe wiring harness, so it is ready to mount.
Key features
- 12 degree spot optics
- 1,080 raw lumens per light
- On-board thermal management
- Impact resistant die-cast aluminum housing
- Clear Lexan lens
- Brackets, hardware and harness included
Clear lens for work lighting
A clear lens shows the LEDs’ natural white output and suits spot work where true color matters. It suits spot work where a focused beam is needed, and the beam pattern stays the same as an amber version, so the choice comes down to color and surroundings. Test the spot at dusk on the actual mounting position before fixing the brackets, since the hotspot can land higher than expected.
Spot beams reward careful aiming. Set the pair on level ground and point the hotspot down the trail ahead, where the track bends. Recheck the setting after rough runs, since bumps can knock brackets out of line.
Lexan lenses shrug off small stones, but they scratch more easily than glass. Clean them with mild soap and a soft cloth, and avoid dry wiping grit across the surface. Check seals after heavy rain or water crossings.
Specifications
| Brand | KC HiLites |
|---|---|
| Light series | C-Series C3, 3 inch |
| Light shape | Square |
| Lens color | Clear |
| Bulb type | LED, 12 W per light (CREE) |
| Raw lumens | 1,080 lm per light |
| Beam pattern | Spot, 12 degree optics |
| Housing | Die-cast aluminum |
| Lens | Lexan |
| Mounting | Bracket kit with hardware |
| Included | Pair of C3 lights, deluxe wiring harness, brackets |
Vehicle fitment
It is a universal fit and is not built for one vehicle. Pick a mounting spot that suits your vehicle, and make sure the brackets clear the body and wiring.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The system is supplied with brackets, hardware and a harness, so no custom parts are needed. Run the harness through a fused relay, and check local rules on auxiliary lights before using them on public roads.
What’s included
A pair of 3 inch C3 LED lights with clear lenses, a deluxe wiring harness and die-cast mounting brackets with hardware.









