Overview
The Jeep Rock Rails, part number 82215129AB, are rocker guards for the 2018 and newer Jeep Wrangler JL, 2-door. They are built to protect the body from rocks and obstacles while off-roading, and they add body protection along the lower sides of the vehicle.
The rails are zinc-coated steel, roll-formed for corrosion resistance. The outer surface is e-coated and then coated with Durabull, a truck bedliner coating, for durability. They are supplied as a pair.
Key features
- Zinc-coated steel for corrosion resistance
- Roll-formed construction
- E-coated outer surface under a Durabull truck bedliner coating
- Black powder coat finish
- Body protection for the 2-door Wrangler JL
- Supplied as a pair
Before you buy
Rocker guards take the first hit from rocks, mud and stumps on the lower body, so the mounting points and the steel itself carry real load on rough trails. A rail that flexes or loses its coating can let moisture reach the sill, which is why the corrosion-resistant construction matters more than appearance alone. On a Wrangler JL 2-door, the rails work well when the rest of the lower body is in sound condition, since a bent fender or loose door hinge can shift stress into the mounts.
Because these rails require cutting or drilling, plan the install before you start. Check the sill area for existing rust, seal bare metal before fitting, and have a helper hold the rail while you mark the holes. After the first few trail runs, re-check fasteners and look for coating chips at contact points, which can be touched up before corrosion starts.
- Inspect the sill for rust before installation
- Touch up chipped coating at contact points
- Re-torque fasteners after the first trail runs
Specifications
| Brand | Jeep |
|---|---|
| Part number | 82215129AB |
| UPC | 700008496681 |
| Material | Zinc-coated steel |
| Outer coating | E-coat, then Durabull coating |
| Finish | Black powder coat |
| Fitment type | Direct fit |
| Installation type | Cutting or drilling required |
| Quantity | Pair |
Vehicle fitment
These rails are for the 2018 and newer Jeep Wrangler JL, 2-door, which is the 2018-2026 model range. The fitment is direct fit.
The rails are for the two-door JL, so the four-door JLU and earlier Wrangler generations such as the JK are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
These rails require cutting or drilling, so this is a more involved install than a bolt-on kit. Wear eye protection while cutting or drilling.
What’s included
The rails come as a pair.
Not included: Mounting hardware is not included in the set. Check the package contents against your installation before starting.








