Overview
The Smittybilt Rock Crawler Rocker Guards (part 76643) are textured black rocker guards for 2-door models. They are made from heavy-duty 2 inch E-coated powder coat steel tube and are built for rough terrain along the rocker area.
The guards need no cutting or drilling, so they mount with the hardware included in the kit. The guard is a tubular design with a standoff for the rocker.
Key features
- Heavy-duty 2 inch steel tubing
- E-coated powder coat finish
- Tubular guard with standoff
- Textured black powder coat
- No cutting or drilling required
Rocker protection on the trail
Rocker guards take the abuse that the lower body would otherwise see from rocks, stumps and ledges. A tubular design spreads impact along the tube rather than into one panel, and the standoff holds the tube away from the body so the metal below is not pinched. Trail use is hard on the rocker, so the guard should be inspected as regularly as the tires.
Choosing a rocker guard comes down to how you drive. Daily road use has little contact with the rocker, while rock crawling puts repeated load on the mounts. A guard that stays tight through many trail miles is more useful than one that only looks rugged on the shelf, so check hardware torque and welds regularly.
Keep the finish intact. Chipped textured coating lets moisture reach the steel, and rust can spread under the paint near the tube joints. Wash off mud, dry the guard, and touch up any scrapes with a rust-inhibiting primer and matching paint.
- Inspect mounts after rough trail use
- Touch up chips before rust starts
- Compare guard height to the wheel opening
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76643 |
| UPC | 631410084443 |
| Tube size | 2 inch steel tubing |
| Finish | Textured black powder coat |
| Body style | 2-door models |
| Installation | No cutting or drilling required |
| Style | Tubular guard with tubular standoff |
Vehicle fitment
The guards are made for 2-door models. Match your model year to the vehicle, and compare the mounting points on the rocker.
Installation notes
Because the guards need no cutting or drilling, check the standoff position against the rocker before final tightening. Look for clearance at the wheel opening once they are mounted.
What’s included
One rock crawler rocker guard in textured black, with its tubular standoff.









