Overview
The Bushwacker 50011-02 is a pair of OE style front fender flares for the Dodge Ram. Bushwacker says they add up to 1.75 inches of tire coverage from debris and are designed to look like an upgraded factory trim option. The flares are made from Dura-Flex 2000 and carry an OEM-style matte black finish.
It fits the 1994 to 2001 Ram 1500 and the 1994 to 2002 Ram 2500 and 3500. The install takes minutes with minimal drilling. The flares are made from Dura-Flex 2000 with UV protection, so they will not chalk. The OE style is designed to complement the Ram’s styling so they look factory-fitted. The material is thick and resists warping. The rear pair is part 50012-02 and the set is part 50903-02.
Key features
- OE style design for the front position
- Adds up to 1.75 inches of tire coverage from debris
- Minimum drilling for installation
- 100 percent UV protected Dura-Flex 2000 that resists chalking
- OEM matte black smooth finish that is easy to paint
- Made in the USA with a limited lifetime warranty
Clearance and tire fit
Front fender flares cover the part of the tire that sits past the factory fender edge, which matters most when tires are wider than stock. Before buying, measure the gap between the tire and the inner fender at full steering lock and at full suspension compression. A flare that looks correct at rest can rub when the front end is turned or loaded on rough trail.
Flares are usually fitted alongside wheels and tires, not on their own. A wider wheel with a lower offset can move the tire outward past the flare edge. Check tire size and offset before installing, and recheck clearance after any change to the suspension or steering.
After the first few drives, check the mounting points and fasteners, then inspect them periodically. Look for cracks at the mounts, loose fasteners, and finish wear at contact edges, since those marks show where the flare is moving against the tire or body.
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 50011-02 |
| UPC | 90689105042 |
| Position | Front |
| Width and tire coverage | 1.75 inches |
| Quantity | Sold as a pair |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
| Model years | 1994 to 2001 Dodge Ram 1500; 1994 to 2002 Dodge Ram 2500 and 3500 |
Vehicle fitment
It fits the 1994 to 2001 Dodge Ram 1500 and the 1994 to 2002 Dodge Ram 2500 and 3500. The 2002 and later Ram 1500 and the 2003 and later heavy-duty trucks are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install takes minutes with minimal drilling. Check the mounting points against your truck before drilling.
What’s included
One pair of OE style front fender flares. The rear pair is part 50012-02 and the set is part 50903-02.
Not included: the rear pair (50012-02) and the full set (50903-02) are sold under separate part numbers.









