Overview
The Bushwacker 31053-02 is a pocket style front fender flare pair for the Toyota Tacoma. The flares are designed to complement oversized tires and high-clearance lift kits, and they add up to 1.75 in. of tire coverage against debris. Confirm fit for your Tacoma’s year before ordering.
The flares use recessed stainless steel bolts, and Bushwacker says they install easily with only minimal drilling. The OEM matte black finish is UV protected so it will not chalk, and it can be painted to match or accent the body color. The flares are made in the USA from Dura-Flex 2000, a material Bushwacker calls tailor-made for durability and flexibility on the trail.
Key features
- Adds up to 1.75 in. of tire coverage against debris
- Recessed stainless steel bolts for a pocket style look
- Installs easily with only minimal drilling
- OEM matte black finish that paints easily
- Dura-Flex 2000 material, 100% UV protected
- Made in the USA, with a Limited Lifetime Warranty
Front flare tips on the trail
Front flares on a Tacoma help keep mud and rocks off the lower body when the tires are larger than stock. Because the front tires steer, the flare edge needs room at full lock and over uneven ground. Take the truck through a slow turn on flat ground and then over a small bump to look for any contact before a longer trip.
Front flares are often installed along with other tire-clearance parts such as bump stops or a fender liner. Look at the whole front clearance when changing tires or lift height, and keep an eye on the flare edge after rough trail use, since repeated flex can loosen the fasteners.
- Check steering clearance before a longer trip
- Inspect fasteners after rough trail use
- Review bump stops and liners when tires change
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 31053-02 |
| UPC | 90689112026 |
| Vehicle | Toyota Tacoma (model years not stated) |
| Position | Front |
| Sold as | Pair |
| Rear pair part number | 31052-02 |
| Set part number | 31920-02 |
| Tire coverage | Up to 1.75 in. |
| Style | Pocket, with recessed stainless steel bolts |
| Finish | OEM matte black, smooth, paintable |
| Material | Dura-Flex 2000, 100% UV protected |
| Installation | Minimal drilling |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
These front flares are made for the Toyota Tacoma. Check the year of your truck against the fit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only minimal drilling is needed for this pair. The product bullets list 31052-02 as the rear pair, so confirm the position you need before drilling anything.
What’s included
A front pair of pocket style flares. The rear pair (31052-02) and the full set (31920-02) are separate part numbers.









