Overview
The Bushwacker 30918-02 is a pocket style fender flare set for the Toyota Tundra, supplied as front and rear pairs. The flares are designed to work with oversized tires and high-clearance lift kits and add up to 1.75 in. of tire coverage against debris. Confirm fit for your vehicle’s year, model and trim before ordering.
The recessed stainless steel bolts allow mounting with no drilling. The OEM-style matte black finish can be left as-is or painted to match the body. The Dura-Flex 2000 material is 100% UV protected and made in the USA.
Key features
- Adds up to 1.75 in. of tire coverage against debris
- Front and rear pairs for a complete set
- Recessed stainless steel bolts for the pocket look
- Mounts right out of the box with no drilling
- OEM-style matte black finish that can be painted
- Dura-Flex 2000 material, 100% UV protected
Living with pocket fender flares
Pocket style flares sit inside the wheel opening rather than flat on the fender, so the bolts and the flare edge take most of the stress from debris and tire throw. Oversized tires push that edge outward, which is where the extra coverage helps. Expect some road grime to collect behind the flare, and clean the area periodically so trapped mud does not keep the surface damp.
Inspect the flare edges and fasteners after rough trail work. Look for cracked plastic near the mounting points, loose bolts and paint wear on a painted finish. Painting the flares works best with a plastic-compatible primer, and a light scuff before painting helps the coat adhere. Keep spare hardware on hand in case a bolt is damaged during installation.
- Clean behind the flares after muddy trips
- Check mounting bolts after the first few drives
- Repaint worn edges with a flexible plastic primer
- Watch for rub marks when the suspension compresses
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 30918-02 |
| UPC | 90689117182 |
| Vehicle | Toyota Tundra (model years not stated) |
| Position | Front and rear pairs |
| Front pair part number | 30039-02 |
| Rear pair part number | 30040-02 |
| Tire coverage | Up to 1.75 in. |
| Style | Pocket, with recessed stainless steel bolts |
| Finish | OEM matte black, smooth, paintable |
| Material | Dura-Flex 2000, 100% UV protected |
| Installation | No drilling required |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
The set is for the Toyota Tundra. Confirm fit for your vehicle’s year, model and trim before ordering, and match the front pair 30039-02 and rear pair 30040-02 to the positions you need.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The factory mudflaps must be removed before these flares are installed. Plan for that step before starting the mounting.
What’s included
A front pair (30039-02) and a rear pair (30040-02) of pocket style flares with the recessed stainless steel bolts.













