Overview
The JBA Headers JBA1945S-1 is a 1.5-inch short tube stainless steel header, also called a shorty header, with a natural finish. It fits 1996–2003 Dodge Dakota and Ram 3500 models, 1996–2002 Ram 1500 and 2500 models, and 1998–2002 Dodge Durango models. Shorty headers use short primary tubes in place of the factory exhaust manifolds, and this design offers less restriction than stock manifolds.
The shorty is built as an update to the older long tube design, aimed at racing, towing and daily driving. Its construction features mandrel-bent stainless primary tubes, a Firecone collector and thick collector domes. Because it is sized for specific trucks and SUVs, confirm fit for your vehicle’s year, model and trim before buying.
Key features
- Mandrel-bent stainless steel primary tubes, which JBA says improve flow, durability and throttle response
- Proprietary JBA Firecone collector, designed by JBA for power gains
- Factory style emission connections for easier installation
- Extra thick collector domes that JBA says resist distortion and leaks
- 3/8-inch thick machined flanges that resist warping and help prevent leaks
- Oversized exhaust ports that accommodate cylinder head porting
- Optional polished metallic ceramic or titanium ceramic coatings for added corrosion protection, or a thermal barrier coating for lower underhood temperatures
Shorty versus long tube headers
A shorty header keeps the primary tubes short, so the collector sits close to the cylinder head and often tucks up under the hood. That gives more room for the engine bay and can simplify the fit on trucks where a full-length header would reach into the frame or steering components. The trade-off is that the collector location changes the exhaust routing and can affect sensor placement and heat near the firewall.
Before choosing a shorty, look at the rest of the exhaust, the oxygen sensors and any heat shielding that may need to move. Many owners replace the gaskets and fasteners at the same time, since the joints see heat and vibration. A careful check of flange alignment at install prevents most leaks.
- Confirm oxygen sensor clearance after fitting
- Replace head and collector gaskets as a set
- Check the collector area for heat damage
- Recheck flange alignment after the first run
Specifications
| Brand | JBA Headers |
|---|---|
| Part number | JBA1945S-1 |
| Header type | Short tube (shorty) |
| Primary tube diameter | 1.5 inches |
| Material | Stainless steel |
| Finish | Natural |
| Flange thickness | 3/8 inch, machined |
| Fitment type | Direct fit |
| Optional coatings | Polished metallic ceramic, titanium ceramic, thermal barrier |
| Hardware | High quality hardware included |
Vehicle fitment
It fits these vehicles:
- 1996–2003 Dodge Dakota (Base, R/T, SLT, Sport, WS)
- 1998–2002 Dodge Durango (Base, R/T, SLT, SLT Plus, Sport)
- 1996–2002 Dodge Ram 1500 (Base, LT, Laramie, SLT, SS/T 5.9L, ST, Sport)
- 1996–2002 Dodge Ram 2500 (Base)
- 1996–2003 Dodge Ram 3500 (Base, Laramie, SLT, ST)
Years outside these ranges and Dodge models not named here are not covered by this list, including Ram 2500 models from 2003 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
JBA describes its installation instructions as thorough and says each system is designed for a professional, no-leak installation. Follow the included instructions and check the joints for leaks once the engine is running.
What’s included
Each system is supplied with high quality hardware and thorough installation instructions. Optional coatings are available as choices, so confirm which finish you need before ordering.








