Overview
The Rugged Ridge Heavy-Duty Off-Road Muffler, part RUG17606.70, is an axle-back muffler with a single rear exit and no tip. It is designed to give a more aggressive tone than a stock muffler.
The muffler is designed to sit as high as possible for off-road ground clearance, and its exhaust tip is positioned so the frame helps protect it on the trail. The stainless and aluminized steel body carries a black high temp coating, which the company says supports durability.
Key features
- Deeper tone than a stock muffler
- High mounting position for off-road ground clearance
- Exhaust tip positioned to be protected by the frame
- Stainless and aluminized steel construction
- Black high temp coating
Choosing a muffler for off-road use
An axle-back muffler replaces only the section behind the rear axle, so the exhaust routing ahead of it stays the same. Choosing one for trail use means weighing ground clearance against tone. A high mounting position helps the muffler clear rocks and ruts, but the inlet and outlet still need to align with the existing pipe.
A tip not included with the kit can change how the exhaust exits and sounds. If you plan to add a tip, measure the outlet diameter and make sure the tip seats firmly on the muffler. Check that the tip cannot strike the rear tire or bumper during articulation.
Off-road exhausts take heavy abuse from stones, mud and water. Inspect welds and the coating after each trip, and look for cracks around the mounting points. Carrying a spare clamp and hanger set can help with a quick fix on the trail.
- Verify inlet and mounting points before fitting
- Measure tip diameter if adding a tip
- Check the coating after rock strikes
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | RUG17606.70 |
| System type | Axle-back |
| Material | Stainless steel and aluminized steel |
| Coating | Black high temp |
| Exit location and type | Single rear |
| Tubing size | Not applicable |
| Tip | Not included |
Vehicle fitment
Confirm the inlet and mounting points against your Wrangler’s year, model and trim before buying.
Verify fit for your vehicle’s year, model and trim before ordering.
Installation notes
Because this muffler replaces the stock unit behind the axle, confirm the inlet and mounting points match your vehicle before fitting it. Work under a raised vehicle only on stable jack stands or a lift.
What’s included
Not included: The tip is not included. Check the box for hangers, clamps and pipe before starting work.









