Overview
The ARB 2797 is an Old Man Emu coil spring, part number 2797, with UPC 9319092022649. It is labelled direct fit, but no vehicle is named for it.
Old Man Emu springs are individually tailored to a make and model, with the load capacity and handling of that vehicle built in. Confirm the vehicle with the manufacturer before ordering.
Key features
- Direct fit labeling without a named vehicle
- Tailored to a specific make and model
- Part number 2797 with UPC 9319092022649
Matching springs to your load
A coil spring carries part of the vehicle’s weight at each corner, so its job is closely tied to the load and ride height. When a spring sags or fatigues, the corner sits lower, the geometry changes and the suspension may bottom out more often. Matching the spring to how the vehicle is normally used helps keep the ride and steering predictable.
Springs are usually replaced with shocks and bushes in view, because a worn shock can make a new spring feel harsh or uneven. Check that the spring seats correctly in its pocket and that the rubber seat pad is in good condition before reassembly.
- Measure ride height at each corner before removal
- Compare the spring’s seat height with the other side
- Check the rubber seat pads and upper mounts
- Realign the suspension and recheck headlight aim after fitting
Specifications
| Brand | ARB 4×4 Accessories (Old Man Emu) |
|---|---|
| Part number | 2797 |
| UPC | 9319092022649 |
| Type | Coil spring |
Vehicle fitment
No vehicle is named for this part. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A coil spring sets the ride height of the corner it sits in, so replacing one changes that corner’s geometry. Check alignment and headlight aim after fitting. Because no model is named for this spring, confirm the vehicle before ordering or fitting it.
Measure the existing ride height before removing the old spring, so the change can be checked against it afterwards.




