Overview
The Pro Comp rear Add-A-Leaf kit, part number 13130, is a pair of long, dual-leaf kits for the rear of a vehicle.
Add-a-leaf kits are used when 1.5 to 2.5 inches of raised height is needed. The kit strengthens an existing leaf spring pack, which helps when a spring has aged or carries heavy loads.
Key features
- Rear position, long, dual leaf
- Sold as a pair
- Designed for 1.5 to 2.5 inches of raised height
- Strengthens an existing leaf spring pack
Before you buy an add-a-leaf
An add-a-leaf adds one extra leaf to the spring pack, so the rear rides higher and the existing leaves share the load differently. Because the kit works with the leaves already in place, the condition of the current pack matters. Springs that have sagged or taken heavy loads often show uneven height side to side, cracked leaves or a shifted center bolt. Those problems should be corrected before a new leaf is added, since an extra leaf will not fix a broken spring.
Length and mounting are the other points to check. A long leaf reaches farther along the spring than a short one, so the kit should match the spring’s eye-to-eye span and the clamp positions on your axle. Shock length often needs a check after a rear lift, and brake lines and the parking brake cable may need a look as well. Many owners replace the rear shocks and U-bolts at the same time, since they are already being removed during the job. Re-torque the U-bolts after the first few miles of driving.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13130 |
| UPC | 614901140149 |
| Position | Rear |
| Length | Long |
| Leaf type | Dual leaf |
| Raised height | 1.5 to 2.5 in |
| Quantity | Pair |
| Fitment type | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and check the rear spring length against your leaf pack.
Installation notes
Raising the ride height with leaves changes driveline angles, so have them checked after installation.
What’s included
A pair of rear add-a-leaf kits.












