Overview
The ICON Vehicle Dynamics Vector 5 is a 17×8.5 aluminum split spoke wheel in titanium, part number ICO2617857345TT, with a 5 on 5 bolt pattern, center bore 71.5 and offset -6. It suits trucks and off-road vehicles, and it is universal fit, so it is not built for one model. Check the bolt pattern, center bore and offset against your own vehicle before mounting.
The application-specific offset and backspacing support better wheel fit, reduced scrub radius, caliper clearance and suspension travel. The aluminum alloy construction offers strength for off-road excursions, towing and hauling. A featureless lip keeps debris from getting trapped, which makes care and maintenance easier.
Key features
- Titanium finish on a split spoke design
- Aluminum alloy construction for off-road, towing and hauling use
- Featureless lip design that ICON says resists debris buildup
- Offset -6 and backspacing 4.5, application-specific
- 17 Inches diameter and 8.5 Inches width
- Center bore 71.5 with a 5 on 5 bolt pattern
Offset -6 and clearance
A negative offset moves the mounting face outboard, so the wheel sits further out from the hub. That can widen the stance and give more room inside the fender, but it also loads the wheel bearings and steering parts differently. Watch for tire contact on outer fender edges, especially with wider tires or a suspension lift.
Testing matters more than the number alone. Turn the steering to both locks and cycle the suspension with the wheel mounted to check for rub. Recheck after the first drive, since new tires settle and wheel seats can shift slightly. Record the setup you tested so future changes start from a known baseline.
- Check outer fender clearance at full lock
- Confirm the 5 on 5 pattern seats fully against the hub
- Inspect wheel bearings if steering feels loose
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO2617857345TT |
| Series | Vector 5 |
| Style | Split Spoke |
| Wheel diameter | 17 Inches |
| Wheel width | 8.5 Inches |
| Bolt pattern | 5 on 5 |
| Center bore | 71.5 |
| Offset | -6 |
| Backspacing | 4.5 |
| Finish | Titanium |
| Construction | Aluminum |
| Fitment | Universal fit |
Vehicle fitment
This wheel is universal fit, so it is not sized for one application. With an offset of -6 and backspacing of 4.5, test the fit on your hub and check clearance before choosing it. Confirm fitment against your own year, model and trim.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 71.5 center bore should suit your hub’s pilot diameter, and the 5 on 5 pattern must line up with the studs exactly. Before first use, turn the steering to full lock and confirm the negative offset still clears the brake caliper and suspension parts.
What’s included
One wheel is described here. Tires, lug nuts and center caps are not referenced, so assume they are separate.

